1096 lines
39 KiB
Diff
1096 lines
39 KiB
Diff
From: Chris Renshaw <osm0sis@outlook.com>
|
|
Date: Fri, 4 Dec 2015 10:35:59 -0400
|
|
Subject: [PATCH] ifenslave: add missing headers
|
|
|
|
Imported from dorimanx's combined ported header toolchain:
|
|
https://github.com/dorimanx/android-busybox-ndk
|
|
---
|
|
include/linux/ethtool.h | 940 +++++++++++++++++++++++++++++++++++++++++++++
|
|
include/linux/if_bonding.h | 128 ++++++
|
|
2 files changed, 1068 insertions(+)
|
|
create mode 100644 include/linux/ethtool.h
|
|
create mode 100644 include/linux/if_bonding.h
|
|
|
|
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
|
|
new file mode 100644
|
|
index 0000000..f96037f
|
|
--- /dev/null
|
|
+++ b/include/linux/ethtool.h
|
|
@@ -0,0 +1,940 @@
|
|
+/*
|
|
+ * ethtool.h: Defines for Linux ethtool.
|
|
+ *
|
|
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
|
|
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
|
|
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
|
|
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
|
|
+ * christopher.leech@intel.com,
|
|
+ * scott.feldman@intel.com)
|
|
+ * Portions Copyright (C) Sun Microsystems 2008
|
|
+ */
|
|
+
|
|
+#ifndef _LINUX_ETHTOOL_H
|
|
+#define _LINUX_ETHTOOL_H
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/if_ether.h>
|
|
+
|
|
+/* This should work for both 32 and 64 bit userland. */
|
|
+struct ethtool_cmd {
|
|
+ __u32 cmd;
|
|
+ __u32 supported; /* Features this interface supports */
|
|
+ __u32 advertising; /* Features this interface advertises */
|
|
+ __u16 speed; /* The forced speed (lower bits) in
|
|
+ * Mbps. Please use
|
|
+ * ethtool_cmd_speed()/_set() to
|
|
+ * access it */
|
|
+ __u8 duplex; /* Duplex, half or full */
|
|
+ __u8 port; /* Which connector port */
|
|
+ __u8 phy_address;
|
|
+ __u8 transceiver; /* Which transceiver to use */
|
|
+ __u8 autoneg; /* Enable or disable autonegotiation */
|
|
+ __u8 mdio_support;
|
|
+ __u32 maxtxpkt; /* Tx pkts before generating tx int */
|
|
+ __u32 maxrxpkt; /* Rx pkts before generating rx int */
|
|
+ __u16 speed_hi; /* The forced speed (upper
|
|
+ * bits) in Mbps. Please use
|
|
+ * ethtool_cmd_speed()/_set() to
|
|
+ * access it */
|
|
+ __u8 eth_tp_mdix;
|
|
+ __u8 reserved2;
|
|
+ __u32 lp_advertising; /* Features the link partner advertises */
|
|
+ __u32 reserved[2];
|
|
+};
|
|
+
|
|
+static __inline__ void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
|
|
+ __u32 speed)
|
|
+{
|
|
+
|
|
+ ep->speed = (__u16)speed;
|
|
+ ep->speed_hi = (__u16)(speed >> 16);
|
|
+}
|
|
+
|
|
+static __inline__ __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
|
|
+{
|
|
+ return (ep->speed_hi << 16) | ep->speed;
|
|
+}
|
|
+
|
|
+#define ETHTOOL_FWVERS_LEN 32
|
|
+#define ETHTOOL_BUSINFO_LEN 32
|
|
+/* these strings are set to whatever the driver author decides... */
|
|
+struct ethtool_drvinfo {
|
|
+ __u32 cmd;
|
|
+ char driver[32]; /* driver short name, "tulip", "eepro100" */
|
|
+ char version[32]; /* driver version string */
|
|
+ char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
|
|
+ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
|
|
+ /* For PCI devices, use pci_name(pci_dev). */
|
|
+ char reserved1[32];
|
|
+ char reserved2[12];
|
|
+ /*
|
|
+ * Some struct members below are filled in
|
|
+ * using ops->get_sset_count(). Obtaining
|
|
+ * this info from ethtool_drvinfo is now
|
|
+ * deprecated; Use ETHTOOL_GSSET_INFO
|
|
+ * instead.
|
|
+ */
|
|
+ __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
|
|
+ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
|
|
+ __u32 testinfo_len;
|
|
+ __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
|
|
+ __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
|
|
+};
|
|
+
|
|
+#define SOPASS_MAX 6
|
|
+/* wake-on-lan settings */
|
|
+struct ethtool_wolinfo {
|
|
+ __u32 cmd;
|
|
+ __u32 supported;
|
|
+ __u32 wolopts;
|
|
+ __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
|
|
+};
|
|
+
|
|
+/* for passing single values */
|
|
+struct ethtool_value {
|
|
+ __u32 cmd;
|
|
+ __u32 data;
|
|
+};
|
|
+
|
|
+/* for passing big chunks of data */
|
|
+struct ethtool_regs {
|
|
+ __u32 cmd;
|
|
+ __u32 version; /* driver-specific, indicates different chips/revs */
|
|
+ __u32 len; /* bytes */
|
|
+ __u8 data[0];
|
|
+};
|
|
+
|
|
+/* for passing EEPROM chunks */
|
|
+struct ethtool_eeprom {
|
|
+ __u32 cmd;
|
|
+ __u32 magic;
|
|
+ __u32 offset; /* in bytes */
|
|
+ __u32 len; /* in bytes */
|
|
+ __u8 data[0];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
|
|
+ * @cmd: ETHTOOL_{G,S}COALESCE
|
|
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
|
|
+ * a packet arrives.
|
|
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
|
|
+ * before an RX interrupt.
|
|
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
|
|
+ * this value applies while an IRQ is being serviced by the host.
|
|
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
|
|
+ * except that this value applies while an IRQ is being serviced
|
|
+ * by the host.
|
|
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
|
|
+ * a packet is sent.
|
|
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
|
|
+ * before a TX interrupt.
|
|
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
|
|
+ * this value applies while an IRQ is being serviced by the host.
|
|
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
|
|
+ * except that this value applies while an IRQ is being serviced
|
|
+ * by the host.
|
|
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
|
|
+ * statistics block updates. Some drivers do not have an
|
|
+ * in-memory statistic block, and in such cases this value is
|
|
+ * ignored. This value must not be zero.
|
|
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
|
|
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
|
|
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
|
|
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
|
|
+ * a packet arrives, when the packet rate is below @pkt_rate_low.
|
|
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
|
|
+ * before an RX interrupt, when the packet rate is below @pkt_rate_low.
|
|
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
|
|
+ * a packet is sent, when the packet rate is below @pkt_rate_low.
|
|
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
|
|
+ * a TX interrupt, when the packet rate is below @pkt_rate_low.
|
|
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
|
|
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
|
|
+ * a packet arrives, when the packet rate is above @pkt_rate_high.
|
|
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
|
|
+ * before an RX interrupt, when the packet rate is above @pkt_rate_high.
|
|
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
|
|
+ * a packet is sent, when the packet rate is above @pkt_rate_high.
|
|
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
|
|
+ * a TX interrupt, when the packet rate is above @pkt_rate_high.
|
|
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
|
|
+ * sampling, measured in seconds. Must not be zero.
|
|
+ *
|
|
+ * Each pair of (usecs, max_frames) fields specifies this exit
|
|
+ * condition for interrupt coalescing:
|
|
+ * (usecs > 0 && time_since_first_completion >= usecs) ||
|
|
+ * (max_frames > 0 && completed_frames >= max_frames)
|
|
+ * It is illegal to set both usecs and max_frames to zero as this
|
|
+ * would cause interrupts to never be generated. To disable
|
|
+ * coalescing, set usecs = 0 and max_frames = 1.
|
|
+ *
|
|
+ * Some implementations ignore the value of max_frames and use the
|
|
+ * condition:
|
|
+ * time_since_first_completion >= usecs
|
|
+ * This is deprecated. Drivers for hardware that does not support
|
|
+ * counting completions should validate that max_frames == !rx_usecs.
|
|
+ *
|
|
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
|
|
+ * drivers to improve latency under low packet rates and improve
|
|
+ * throughput under high packet rates. Some drivers only implement
|
|
+ * one of RX or TX adaptive coalescing. Anything not implemented by
|
|
+ * the driver causes these values to be silently ignored.
|
|
+ *
|
|
+ * When the packet rate is below @pkt_rate_high but above
|
|
+ * @pkt_rate_low (both measured in packets per second) the
|
|
+ * normal {rx,tx}_* coalescing parameters are used.
|
|
+ */
|
|
+struct ethtool_coalesce {
|
|
+ __u32 cmd;
|
|
+ __u32 rx_coalesce_usecs;
|
|
+ __u32 rx_max_coalesced_frames;
|
|
+ __u32 rx_coalesce_usecs_irq;
|
|
+ __u32 rx_max_coalesced_frames_irq;
|
|
+ __u32 tx_coalesce_usecs;
|
|
+ __u32 tx_max_coalesced_frames;
|
|
+ __u32 tx_coalesce_usecs_irq;
|
|
+ __u32 tx_max_coalesced_frames_irq;
|
|
+ __u32 stats_block_coalesce_usecs;
|
|
+ __u32 use_adaptive_rx_coalesce;
|
|
+ __u32 use_adaptive_tx_coalesce;
|
|
+ __u32 pkt_rate_low;
|
|
+ __u32 rx_coalesce_usecs_low;
|
|
+ __u32 rx_max_coalesced_frames_low;
|
|
+ __u32 tx_coalesce_usecs_low;
|
|
+ __u32 tx_max_coalesced_frames_low;
|
|
+ __u32 pkt_rate_high;
|
|
+ __u32 rx_coalesce_usecs_high;
|
|
+ __u32 rx_max_coalesced_frames_high;
|
|
+ __u32 tx_coalesce_usecs_high;
|
|
+ __u32 tx_max_coalesced_frames_high;
|
|
+ __u32 rate_sample_interval;
|
|
+};
|
|
+
|
|
+/* for configuring RX/TX ring parameters */
|
|
+struct ethtool_ringparam {
|
|
+ __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
|
|
+
|
|
+ /* Read only attributes. These indicate the maximum number
|
|
+ * of pending RX/TX ring entries the driver will allow the
|
|
+ * user to set.
|
|
+ */
|
|
+ __u32 rx_max_pending;
|
|
+ __u32 rx_mini_max_pending;
|
|
+ __u32 rx_jumbo_max_pending;
|
|
+ __u32 tx_max_pending;
|
|
+
|
|
+ /* Values changeable by the user. The valid values are
|
|
+ * in the range 1 to the "*_max_pending" counterpart above.
|
|
+ */
|
|
+ __u32 rx_pending;
|
|
+ __u32 rx_mini_pending;
|
|
+ __u32 rx_jumbo_pending;
|
|
+ __u32 tx_pending;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_channels - configuring number of network channel
|
|
+ * @cmd: ETHTOOL_{G,S}CHANNELS
|
|
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
|
|
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
|
|
+ * @max_other: Read only. Maximum number of other channel the driver support.
|
|
+ * @max_combined: Read only. Maximum number of combined channel the driver
|
|
+ * support. Set of queues RX, TX or other.
|
|
+ * @rx_count: Valid values are in the range 1 to the max_rx.
|
|
+ * @tx_count: Valid values are in the range 1 to the max_tx.
|
|
+ * @other_count: Valid values are in the range 1 to the max_other.
|
|
+ * @combined_count: Valid values are in the range 1 to the max_combined.
|
|
+ *
|
|
+ * This can be used to configure RX, TX and other channels.
|
|
+ */
|
|
+
|
|
+struct ethtool_channels {
|
|
+ __u32 cmd;
|
|
+ __u32 max_rx;
|
|
+ __u32 max_tx;
|
|
+ __u32 max_other;
|
|
+ __u32 max_combined;
|
|
+ __u32 rx_count;
|
|
+ __u32 tx_count;
|
|
+ __u32 other_count;
|
|
+ __u32 combined_count;
|
|
+};
|
|
+
|
|
+/* for configuring link flow control parameters */
|
|
+struct ethtool_pauseparam {
|
|
+ __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
|
|
+
|
|
+ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
|
|
+ * being true) the user may set 'autoneg' here non-zero to have the
|
|
+ * pause parameters be auto-negotiated too. In such a case, the
|
|
+ * {rx,tx}_pause values below determine what capabilities are
|
|
+ * advertised.
|
|
+ *
|
|
+ * If 'autoneg' is zero or the link is not being auto-negotiated,
|
|
+ * then {rx,tx}_pause force the driver to use/not-use pause
|
|
+ * flow control.
|
|
+ */
|
|
+ __u32 autoneg;
|
|
+ __u32 rx_pause;
|
|
+ __u32 tx_pause;
|
|
+};
|
|
+
|
|
+#define ETH_GSTRING_LEN 32
|
|
+enum ethtool_stringset {
|
|
+ ETH_SS_TEST = 0,
|
|
+ ETH_SS_STATS,
|
|
+ ETH_SS_PRIV_FLAGS,
|
|
+ ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
|
|
+ ETH_SS_FEATURES,
|
|
+};
|
|
+
|
|
+/* for passing string sets for data tagging */
|
|
+struct ethtool_gstrings {
|
|
+ __u32 cmd; /* ETHTOOL_GSTRINGS */
|
|
+ __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
|
|
+ __u32 len; /* number of strings in the string set */
|
|
+ __u8 data[0];
|
|
+};
|
|
+
|
|
+struct ethtool_sset_info {
|
|
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
|
|
+ __u32 reserved;
|
|
+ __u64 sset_mask; /* input: each bit selects an sset to query */
|
|
+ /* output: each bit a returned sset */
|
|
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
|
|
+ in sset_mask. One bit implies one
|
|
+ __u32, two bits implies two
|
|
+ __u32's, etc. */
|
|
+};
|
|
+
|
|
+/**
|
|
+ * enum ethtool_test_flags - flags definition of ethtool_test
|
|
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
|
|
+ * only online tests.
|
|
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
|
|
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
|
|
+ * test.
|
|
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
|
|
+ */
|
|
+
|
|
+enum ethtool_test_flags {
|
|
+ ETH_TEST_FL_OFFLINE = (1 << 0),
|
|
+ ETH_TEST_FL_FAILED = (1 << 1),
|
|
+ ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
|
|
+ ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
|
|
+};
|
|
+
|
|
+/* for requesting NIC test and getting results*/
|
|
+struct ethtool_test {
|
|
+ __u32 cmd; /* ETHTOOL_TEST */
|
|
+ __u32 flags; /* ETH_TEST_FL_xxx */
|
|
+ __u32 reserved;
|
|
+ __u32 len; /* result length, in number of u64 elements */
|
|
+ __u64 data[0];
|
|
+};
|
|
+
|
|
+/* for dumping NIC-specific statistics */
|
|
+struct ethtool_stats {
|
|
+ __u32 cmd; /* ETHTOOL_GSTATS */
|
|
+ __u32 n_stats; /* number of u64's being returned */
|
|
+ __u64 data[0];
|
|
+};
|
|
+
|
|
+struct ethtool_perm_addr {
|
|
+ __u32 cmd; /* ETHTOOL_GPERMADDR */
|
|
+ __u32 size;
|
|
+ __u8 data[0];
|
|
+};
|
|
+
|
|
+/* boolean flags controlling per-interface behavior characteristics.
|
|
+ * When reading, the flag indicates whether or not a certain behavior
|
|
+ * is enabled/present. When writing, the flag indicates whether
|
|
+ * or not the driver should turn on (set) or off (clear) a behavior.
|
|
+ *
|
|
+ * Some behaviors may read-only (unconditionally absent or present).
|
|
+ * If such is the case, return EINVAL in the set-flags operation if the
|
|
+ * flag differs from the read-only value.
|
|
+ */
|
|
+enum ethtool_flags {
|
|
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
|
|
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
|
|
+ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
|
|
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
|
|
+ ETH_FLAG_RXHASH = (1 << 28),
|
|
+};
|
|
+
|
|
+/* The following structures are for supporting RX network flow
|
|
+ * classification and RX n-tuple configuration. Note, all multibyte
|
|
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
|
|
+ * be in network byte order.
|
|
+ */
|
|
+
|
|
+/**
|
|
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
|
|
+ * @ip4src: Source host
|
|
+ * @ip4dst: Destination host
|
|
+ * @psrc: Source port
|
|
+ * @pdst: Destination port
|
|
+ * @tos: Type-of-service
|
|
+ *
|
|
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
|
|
+ */
|
|
+struct ethtool_tcpip4_spec {
|
|
+ __be32 ip4src;
|
|
+ __be32 ip4dst;
|
|
+ __be16 psrc;
|
|
+ __be16 pdst;
|
|
+ __u8 tos;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
|
|
+ * @ip4src: Source host
|
|
+ * @ip4dst: Destination host
|
|
+ * @spi: Security parameters index
|
|
+ * @tos: Type-of-service
|
|
+ *
|
|
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
|
|
+ */
|
|
+struct ethtool_ah_espip4_spec {
|
|
+ __be32 ip4src;
|
|
+ __be32 ip4dst;
|
|
+ __be32 spi;
|
|
+ __u8 tos;
|
|
+};
|
|
+
|
|
+#define ETH_RX_NFC_IP4 1
|
|
+
|
|
+/**
|
|
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
|
|
+ * @ip4src: Source host
|
|
+ * @ip4dst: Destination host
|
|
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
|
|
+ * @tos: Type-of-service
|
|
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
|
|
+ * @proto: Transport protocol number; mask must be 0
|
|
+ */
|
|
+struct ethtool_usrip4_spec {
|
|
+ __be32 ip4src;
|
|
+ __be32 ip4dst;
|
|
+ __be32 l4_4_bytes;
|
|
+ __u8 tos;
|
|
+ __u8 ip_ver;
|
|
+ __u8 proto;
|
|
+};
|
|
+
|
|
+union ethtool_flow_union {
|
|
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
|
|
+ struct ethtool_tcpip4_spec udp_ip4_spec;
|
|
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
|
|
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
|
|
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
|
|
+ struct ethtool_usrip4_spec usr_ip4_spec;
|
|
+ struct ethhdr ether_spec;
|
|
+ __u8 hdata[60];
|
|
+};
|
|
+
|
|
+struct ethtool_flow_ext {
|
|
+ __be16 vlan_etype;
|
|
+ __be16 vlan_tci;
|
|
+ __be32 data[2];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
|
|
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
|
|
+ * @h_u: Flow fields to match (dependent on @flow_type)
|
|
+ * @h_ext: Additional fields to match
|
|
+ * @m_u: Masks for flow field bits to be matched
|
|
+ * @m_ext: Masks for additional field bits to be matched
|
|
+ * Note, all additional fields must be ignored unless @flow_type
|
|
+ * includes the %FLOW_EXT flag.
|
|
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
|
|
+ * if packets should be discarded
|
|
+ * @location: Location of rule in the table. Locations must be
|
|
+ * numbered such that a flow matching multiple rules will be
|
|
+ * classified according to the first (lowest numbered) rule.
|
|
+ */
|
|
+struct ethtool_rx_flow_spec {
|
|
+ __u32 flow_type;
|
|
+ union ethtool_flow_union h_u;
|
|
+ struct ethtool_flow_ext h_ext;
|
|
+ union ethtool_flow_union m_u;
|
|
+ struct ethtool_flow_ext m_ext;
|
|
+ __u64 ring_cookie;
|
|
+ __u32 location;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
|
|
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
|
|
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
|
|
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
|
|
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
|
|
+ * @data: Command-dependent value
|
|
+ * @fs: Flow classification rule
|
|
+ * @rule_cnt: Number of rules to be affected
|
|
+ * @rule_locs: Array of used rule locations
|
|
+ *
|
|
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
|
|
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
|
|
+ * structure fields must not be used.
|
|
+ *
|
|
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
|
|
+ * on return.
|
|
+ *
|
|
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
|
|
+ * rules on return.
|
|
+ *
|
|
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
|
|
+ * existing rule on entry and @fs contains the rule on return.
|
|
+ *
|
|
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
|
|
+ * user buffer for @rule_locs on entry. On return, @data is the size
|
|
+ * of the rule table, @rule_cnt is the number of defined rules, and
|
|
+ * @rule_locs contains the locations of the defined rules. Drivers
|
|
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
|
|
+ *
|
|
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
|
|
+ * @fs.@location specifies the location to use and must not be ignored.
|
|
+ *
|
|
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
|
|
+ * existing rule on entry.
|
|
+ */
|
|
+struct ethtool_rxnfc {
|
|
+ __u32 cmd;
|
|
+ __u32 flow_type;
|
|
+ __u64 data;
|
|
+ struct ethtool_rx_flow_spec fs;
|
|
+ __u32 rule_cnt;
|
|
+ __u32 rule_locs[0];
|
|
+};
|
|
+
|
|
+
|
|
+/**
|
|
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
|
|
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
|
|
+ * @size: On entry, the array size of the user buffer. On return from
|
|
+ * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
|
|
+ * @ring_index: RX ring/queue index for each hash value
|
|
+ */
|
|
+struct ethtool_rxfh_indir {
|
|
+ __u32 cmd;
|
|
+ __u32 size;
|
|
+ __u32 ring_index[0];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
|
|
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
|
|
+ * @h_u: Flow field values to match (dependent on @flow_type)
|
|
+ * @m_u: Masks for flow field value bits to be ignored
|
|
+ * @vlan_tag: VLAN tag to match
|
|
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
|
|
+ * @data: Driver-dependent data to match
|
|
+ * @data_mask: Mask for driver-dependent data bits to be ignored
|
|
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
|
|
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
|
|
+ *
|
|
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
|
|
+ * a field value and mask are both zero this is treated as if all mask
|
|
+ * bits are set i.e. the field is ignored.
|
|
+ */
|
|
+struct ethtool_rx_ntuple_flow_spec {
|
|
+ __u32 flow_type;
|
|
+ union {
|
|
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
|
|
+ struct ethtool_tcpip4_spec udp_ip4_spec;
|
|
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
|
|
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
|
|
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
|
|
+ struct ethtool_usrip4_spec usr_ip4_spec;
|
|
+ struct ethhdr ether_spec;
|
|
+ __u8 hdata[72];
|
|
+ } h_u, m_u;
|
|
+
|
|
+ __u16 vlan_tag;
|
|
+ __u16 vlan_tag_mask;
|
|
+ __u64 data;
|
|
+ __u64 data_mask;
|
|
+
|
|
+ __s32 action;
|
|
+#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
|
|
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
|
|
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
|
|
+ * @fs: Flow filter specification
|
|
+ */
|
|
+struct ethtool_rx_ntuple {
|
|
+ __u32 cmd;
|
|
+ struct ethtool_rx_ntuple_flow_spec fs;
|
|
+};
|
|
+
|
|
+#define ETHTOOL_FLASH_MAX_FILENAME 128
|
|
+enum ethtool_flash_op_type {
|
|
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
|
|
+};
|
|
+
|
|
+/* for passing firmware flashing related parameters */
|
|
+struct ethtool_flash {
|
|
+ __u32 cmd;
|
|
+ __u32 region;
|
|
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_dump - used for retrieving, setting device dump
|
|
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
|
|
+ * %ETHTOOL_SET_DUMP
|
|
+ * @version: FW version of the dump, filled in by driver
|
|
+ * @flag: driver dependent flag for dump setting, filled in by driver during
|
|
+ * get and filled in by ethtool for set operation
|
|
+ * @len: length of dump data, used as the length of the user buffer on entry to
|
|
+ * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
|
|
+ * for %ETHTOOL_GET_DUMP_FLAG command
|
|
+ * @data: data collected for get dump data operation
|
|
+ */
|
|
+struct ethtool_dump {
|
|
+ __u32 cmd;
|
|
+ __u32 version;
|
|
+ __u32 flag;
|
|
+ __u32 len;
|
|
+ __u8 data[0];
|
|
+};
|
|
+
|
|
+/* for returning and changing feature sets */
|
|
+
|
|
+/**
|
|
+ * struct ethtool_get_features_block - block with state of 32 features
|
|
+ * @available: mask of changeable features
|
|
+ * @requested: mask of features requested to be enabled if possible
|
|
+ * @active: mask of currently enabled features
|
|
+ * @never_changed: mask of features not changeable for any device
|
|
+ */
|
|
+struct ethtool_get_features_block {
|
|
+ __u32 available;
|
|
+ __u32 requested;
|
|
+ __u32 active;
|
|
+ __u32 never_changed;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_gfeatures - command to get state of device's features
|
|
+ * @cmd: command number = %ETHTOOL_GFEATURES
|
|
+ * @size: in: number of elements in the features[] array;
|
|
+ * out: number of elements in features[] needed to hold all features
|
|
+ * @features: state of features
|
|
+ */
|
|
+struct ethtool_gfeatures {
|
|
+ __u32 cmd;
|
|
+ __u32 size;
|
|
+ struct ethtool_get_features_block features[0];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_set_features_block - block with request for 32 features
|
|
+ * @valid: mask of features to be changed
|
|
+ * @requested: values of features to be changed
|
|
+ */
|
|
+struct ethtool_set_features_block {
|
|
+ __u32 valid;
|
|
+ __u32 requested;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * struct ethtool_sfeatures - command to request change in device's features
|
|
+ * @cmd: command number = %ETHTOOL_SFEATURES
|
|
+ * @size: array size of the features[] array
|
|
+ * @features: feature change masks
|
|
+ */
|
|
+struct ethtool_sfeatures {
|
|
+ __u32 cmd;
|
|
+ __u32 size;
|
|
+ struct ethtool_set_features_block features[0];
|
|
+};
|
|
+
|
|
+/*
|
|
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
|
|
+ * values of corresponding bits in features[].requested. Bits in .requested
|
|
+ * not set in .valid or not changeable are ignored.
|
|
+ *
|
|
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
|
|
+ * or size is not equal to required number of features words (32-bit blocks).
|
|
+ * Returns >= 0 if request was completed; bits set in the value mean:
|
|
+ * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
|
|
+ * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
|
|
+ * those bits were ignored.
|
|
+ * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
|
|
+ * resulting state of bits masked by .valid is not equal to .requested.
|
|
+ * Probably there are other device-specific constraints on some features
|
|
+ * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
|
|
+ * here as though ignored bits were cleared.
|
|
+ * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
|
|
+ * compatibility functions. Requested offload state cannot be properly
|
|
+ * managed by kernel.
|
|
+ *
|
|
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
|
|
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
|
|
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
|
|
+ * significant bit in features[0] fields. Empty strings mark undefined features.
|
|
+ */
|
|
+enum ethtool_sfeatures_retval_bits {
|
|
+ ETHTOOL_F_UNSUPPORTED__BIT,
|
|
+ ETHTOOL_F_WISH__BIT,
|
|
+ ETHTOOL_F_COMPAT__BIT,
|
|
+};
|
|
+
|
|
+#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
|
|
+#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
|
|
+#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
|
|
+
|
|
+
|
|
+/* CMDs currently supported */
|
|
+#define ETHTOOL_GSET 0x00000001 /* Get settings. */
|
|
+#define ETHTOOL_SSET 0x00000002 /* Set settings. */
|
|
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
|
|
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
|
|
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
|
|
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
|
|
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
|
|
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
|
|
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
|
|
+/* Get link status for host, i.e. whether the interface *and* the
|
|
+ * physical port (if there is one) are up (ethtool_value). */
|
|
+#define ETHTOOL_GLINK 0x0000000a
|
|
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
|
|
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
|
|
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
|
|
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
|
|
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
|
|
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
|
|
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
|
|
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
|
|
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
|
|
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
|
|
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
|
|
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
|
|
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
|
|
+ * (ethtool_value) */
|
|
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
|
|
+ * (ethtool_value). */
|
|
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
|
|
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
|
|
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
|
|
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
|
|
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
|
|
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
|
|
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
|
|
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
|
|
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
|
|
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
|
|
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
|
|
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
|
|
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
|
|
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
|
|
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
|
|
+
|
|
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
|
|
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
|
|
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
|
|
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
|
|
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
|
|
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
|
|
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
|
|
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
|
|
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
|
|
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
|
|
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
|
|
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
|
|
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
|
|
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
|
|
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
|
|
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
|
|
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
|
|
+
|
|
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
|
|
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
|
|
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
|
|
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
|
|
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
|
|
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
|
|
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
|
|
+
|
|
+/* compatibility with older code */
|
|
+#define SPARC_ETH_GSET ETHTOOL_GSET
|
|
+#define SPARC_ETH_SSET ETHTOOL_SSET
|
|
+
|
|
+/* Indicates what features are supported by the interface. */
|
|
+#define SUPPORTED_10baseT_Half (1 << 0)
|
|
+#define SUPPORTED_10baseT_Full (1 << 1)
|
|
+#define SUPPORTED_100baseT_Half (1 << 2)
|
|
+#define SUPPORTED_100baseT_Full (1 << 3)
|
|
+#define SUPPORTED_1000baseT_Half (1 << 4)
|
|
+#define SUPPORTED_1000baseT_Full (1 << 5)
|
|
+#define SUPPORTED_Autoneg (1 << 6)
|
|
+#define SUPPORTED_TP (1 << 7)
|
|
+#define SUPPORTED_AUI (1 << 8)
|
|
+#define SUPPORTED_MII (1 << 9)
|
|
+#define SUPPORTED_FIBRE (1 << 10)
|
|
+#define SUPPORTED_BNC (1 << 11)
|
|
+#define SUPPORTED_10000baseT_Full (1 << 12)
|
|
+#define SUPPORTED_Pause (1 << 13)
|
|
+#define SUPPORTED_Asym_Pause (1 << 14)
|
|
+#define SUPPORTED_2500baseX_Full (1 << 15)
|
|
+#define SUPPORTED_Backplane (1 << 16)
|
|
+#define SUPPORTED_1000baseKX_Full (1 << 17)
|
|
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
|
|
+#define SUPPORTED_10000baseKR_Full (1 << 19)
|
|
+#define SUPPORTED_10000baseR_FEC (1 << 20)
|
|
+#define SUPPORTED_20000baseMLD2_Full (1 << 21)
|
|
+#define SUPPORTED_20000baseKR2_Full (1 << 22)
|
|
+
|
|
+/* Indicates what features are advertised by the interface. */
|
|
+#define ADVERTISED_10baseT_Half (1 << 0)
|
|
+#define ADVERTISED_10baseT_Full (1 << 1)
|
|
+#define ADVERTISED_100baseT_Half (1 << 2)
|
|
+#define ADVERTISED_100baseT_Full (1 << 3)
|
|
+#define ADVERTISED_1000baseT_Half (1 << 4)
|
|
+#define ADVERTISED_1000baseT_Full (1 << 5)
|
|
+#define ADVERTISED_Autoneg (1 << 6)
|
|
+#define ADVERTISED_TP (1 << 7)
|
|
+#define ADVERTISED_AUI (1 << 8)
|
|
+#define ADVERTISED_MII (1 << 9)
|
|
+#define ADVERTISED_FIBRE (1 << 10)
|
|
+#define ADVERTISED_BNC (1 << 11)
|
|
+#define ADVERTISED_10000baseT_Full (1 << 12)
|
|
+#define ADVERTISED_Pause (1 << 13)
|
|
+#define ADVERTISED_Asym_Pause (1 << 14)
|
|
+#define ADVERTISED_2500baseX_Full (1 << 15)
|
|
+#define ADVERTISED_Backplane (1 << 16)
|
|
+#define ADVERTISED_1000baseKX_Full (1 << 17)
|
|
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
|
|
+#define ADVERTISED_10000baseKR_Full (1 << 19)
|
|
+#define ADVERTISED_10000baseR_FEC (1 << 20)
|
|
+#define ADVERTISED_20000baseMLD2_Full (1 << 21)
|
|
+#define ADVERTISED_20000baseKR2_Full (1 << 22)
|
|
+
|
|
+/* The following are all involved in forcing a particular link
|
|
+ * mode for the device for setting things. When getting the
|
|
+ * devices settings, these indicate the current mode and whether
|
|
+ * it was forced up into this mode or autonegotiated.
|
|
+ */
|
|
+
|
|
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
|
|
+#define SPEED_10 10
|
|
+#define SPEED_100 100
|
|
+#define SPEED_1000 1000
|
|
+#define SPEED_2500 2500
|
|
+#define SPEED_10000 10000
|
|
+#define SPEED_UNKNOWN -1
|
|
+
|
|
+/* Duplex, half or full. */
|
|
+#define DUPLEX_HALF 0x00
|
|
+#define DUPLEX_FULL 0x01
|
|
+#define DUPLEX_UNKNOWN 0xff
|
|
+
|
|
+/* Which connector port. */
|
|
+#define PORT_TP 0x00
|
|
+#define PORT_AUI 0x01
|
|
+#define PORT_MII 0x02
|
|
+#define PORT_FIBRE 0x03
|
|
+#define PORT_BNC 0x04
|
|
+#define PORT_DA 0x05
|
|
+#define PORT_NONE 0xef
|
|
+#define PORT_OTHER 0xff
|
|
+
|
|
+/* Which transceiver to use. */
|
|
+#define XCVR_INTERNAL 0x00
|
|
+#define XCVR_EXTERNAL 0x01
|
|
+#define XCVR_DUMMY1 0x02
|
|
+#define XCVR_DUMMY2 0x03
|
|
+#define XCVR_DUMMY3 0x04
|
|
+
|
|
+/* Enable or disable autonegotiation. If this is set to enable,
|
|
+ * the forced link modes above are completely ignored.
|
|
+ */
|
|
+#define AUTONEG_DISABLE 0x00
|
|
+#define AUTONEG_ENABLE 0x01
|
|
+
|
|
+/* Mode MDI or MDI-X */
|
|
+#define ETH_TP_MDI_INVALID 0x00
|
|
+#define ETH_TP_MDI 0x01
|
|
+#define ETH_TP_MDI_X 0x02
|
|
+
|
|
+/* Wake-On-Lan options. */
|
|
+#define WAKE_PHY (1 << 0)
|
|
+#define WAKE_UCAST (1 << 1)
|
|
+#define WAKE_MCAST (1 << 2)
|
|
+#define WAKE_BCAST (1 << 3)
|
|
+#define WAKE_ARP (1 << 4)
|
|
+#define WAKE_MAGIC (1 << 5)
|
|
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
|
|
+
|
|
+/* L2-L4 network traffic flow types */
|
|
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
|
|
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
|
|
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
|
|
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
|
|
+#define TCP_V6_FLOW 0x05 /* hash only */
|
|
+#define UDP_V6_FLOW 0x06 /* hash only */
|
|
+#define SCTP_V6_FLOW 0x07 /* hash only */
|
|
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
|
|
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
|
|
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
|
|
+#define AH_V6_FLOW 0x0b /* hash only */
|
|
+#define ESP_V6_FLOW 0x0c /* hash only */
|
|
+#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
|
|
+#define IPV4_FLOW 0x10 /* hash only */
|
|
+#define IPV6_FLOW 0x11 /* hash only */
|
|
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
|
|
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
|
|
+#define FLOW_EXT 0x80000000
|
|
+
|
|
+/* L3-L4 network traffic flow hash options */
|
|
+#define RXH_L2DA (1 << 1)
|
|
+#define RXH_VLAN (1 << 2)
|
|
+#define RXH_L3_PROTO (1 << 3)
|
|
+#define RXH_IP_SRC (1 << 4)
|
|
+#define RXH_IP_DST (1 << 5)
|
|
+#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
|
|
+#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
|
|
+#define RXH_DISCARD (1 << 31)
|
|
+
|
|
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
|
|
+
|
|
+/* Reset flags */
|
|
+/* The reset() operation must clear the flags for the components which
|
|
+ * were actually reset. On successful return, the flags indicate the
|
|
+ * components which were not reset, either because they do not exist
|
|
+ * in the hardware or because they cannot be reset independently. The
|
|
+ * driver must never reset any components that were not requested.
|
|
+ */
|
|
+enum ethtool_reset_flags {
|
|
+ /* These flags represent components dedicated to the interface
|
|
+ * the command is addressed to. Shift any flag left by
|
|
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
|
|
+ * same type.
|
|
+ */
|
|
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
|
|
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
|
|
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
|
|
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
|
|
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
|
|
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
|
|
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
|
|
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
|
|
+ * multiple components */
|
|
+
|
|
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
|
|
+ * this interface */
|
|
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
|
|
+ * interface, even if shared */
|
|
+};
|
|
+#define ETH_RESET_SHARED_SHIFT 16
|
|
+
|
|
+#endif /* _LINUX_ETHTOOL_H */
|
|
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
|
|
new file mode 100644
|
|
index 0000000..a17edda
|
|
--- /dev/null
|
|
+++ b/include/linux/if_bonding.h
|
|
@@ -0,0 +1,128 @@
|
|
+/*
|
|
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
|
|
+ *
|
|
+ *
|
|
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
|
|
+ * NCM: Network and Communications Management, Inc.
|
|
+ *
|
|
+ * BUT, I'm the one who modified it for ethernet, so:
|
|
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
|
|
+ *
|
|
+ * This software may be used and distributed according to the terms
|
|
+ * of the GNU Public License, incorporated herein by reference.
|
|
+ *
|
|
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
|
|
+ * - Added support for getting slave's speed and duplex via ethtool.
|
|
+ * Needed for 802.3ad and other future modes.
|
|
+ *
|
|
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
|
|
+ * Shmulik Hen <shmulik.hen at intel dot com>
|
|
+ * - Enable support of modes that need to use the unique mac address of
|
|
+ * each slave.
|
|
+ *
|
|
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
|
|
+ * Amir Noam <amir.noam at intel dot com>
|
|
+ * - Moved driver's private data types to bonding.h
|
|
+ *
|
|
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
|
|
+ * Tsippy Mendelson <tsippy.mendelson at intel dot com> and
|
|
+ * Shmulik Hen <shmulik.hen at intel dot com>
|
|
+ * - Added support for IEEE 802.3ad Dynamic link aggregation mode.
|
|
+ *
|
|
+ * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
|
|
+ * - Added ABI version control to restore compatibility between
|
|
+ * new/old ifenslave and new/old bonding.
|
|
+ *
|
|
+ * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
|
|
+ * - Code cleanup and style changes
|
|
+ *
|
|
+ * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
|
|
+ * - added definitions for various XOR hashing policies
|
|
+ */
|
|
+
|
|
+#ifndef _LINUX_IF_BONDING_H
|
|
+#define _LINUX_IF_BONDING_H
|
|
+
|
|
+#include <linux/if.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/if_ether.h>
|
|
+
|
|
+/* userland - kernel ABI version (2003/05/08) */
|
|
+#define BOND_ABI_VERSION 2
|
|
+
|
|
+/*
|
|
+ * We can remove these ioctl definitions in 2.5. People should use the
|
|
+ * SIOC*** versions of them instead
|
|
+ */
|
|
+#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE)
|
|
+#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1)
|
|
+#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2)
|
|
+#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11)
|
|
+#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12)
|
|
+#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13)
|
|
+
|
|
+#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY)
|
|
+
|
|
+#define BOND_MODE_ROUNDROBIN 0
|
|
+#define BOND_MODE_ACTIVEBACKUP 1
|
|
+#define BOND_MODE_XOR 2
|
|
+#define BOND_MODE_BROADCAST 3
|
|
+#define BOND_MODE_8023AD 4
|
|
+#define BOND_MODE_TLB 5
|
|
+#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */
|
|
+
|
|
+/* each slave's link has 4 states */
|
|
+#define BOND_LINK_UP 0 /* link is up and running */
|
|
+#define BOND_LINK_FAIL 1 /* link has just gone down */
|
|
+#define BOND_LINK_DOWN 2 /* link has been down for too long time */
|
|
+#define BOND_LINK_BACK 3 /* link is going back */
|
|
+
|
|
+/* each slave has several states */
|
|
+#define BOND_STATE_ACTIVE 0 /* link is active */
|
|
+#define BOND_STATE_BACKUP 1 /* link is backup */
|
|
+
|
|
+#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */
|
|
+
|
|
+#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */
|
|
+
|
|
+#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */
|
|
+
|
|
+/* hashing types */
|
|
+#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */
|
|
+#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */
|
|
+#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */
|
|
+
|
|
+typedef struct ifbond {
|
|
+ __s32 bond_mode;
|
|
+ __s32 num_slaves;
|
|
+ __s32 miimon;
|
|
+} ifbond;
|
|
+
|
|
+typedef struct ifslave {
|
|
+ __s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
|
|
+ char slave_name[IFNAMSIZ];
|
|
+ __s8 link;
|
|
+ __s8 state;
|
|
+ __u32 link_failure_count;
|
|
+} ifslave;
|
|
+
|
|
+struct ad_info {
|
|
+ __u16 aggregator_id;
|
|
+ __u16 ports;
|
|
+ __u16 actor_key;
|
|
+ __u16 partner_key;
|
|
+ __u8 partner_system[ETH_ALEN];
|
|
+};
|
|
+
|
|
+#endif /* _LINUX_IF_BONDING_H */
|
|
+
|
|
+/*
|
|
+ * Local variables:
|
|
+ * version-control: t
|
|
+ * kept-new-versions: 5
|
|
+ * c-indent-level: 8
|
|
+ * c-basic-offset: 8
|
|
+ * tab-width: 8
|
|
+ * End:
|
|
+ */
|
|
+
|
|
--
|
|
2.5.3
|
|
|