Repo created
This commit is contained in:
parent
51cf8bb4f9
commit
ee0cddf35c
548 changed files with 93129 additions and 2 deletions
171
external/dist/busybox-patches/011-ifplugd.patch
vendored
Normal file
171
external/dist/busybox-patches/011-ifplugd.patch
vendored
Normal file
|
|
@ -0,0 +1,171 @@
|
|||
From: Chris Renshaw <osm0sis@outlook.com>
|
||||
Date: Fri, 4 Dec 2015 10:52:31 -0400
|
||||
Subject: [PATCH] ifplugd: add missing header
|
||||
|
||||
Imported from dorimanx's combined ported header toolchain:
|
||||
https://github.com/dorimanx/android-busybox-ndk
|
||||
---
|
||||
include/linux/mii.h | 151 ++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 151 insertions(+)
|
||||
create mode 100644 include/linux/mii.h
|
||||
|
||||
diff --git a/include/linux/mii.h b/include/linux/mii.h
|
||||
new file mode 100644
|
||||
index 0000000..def553a
|
||||
--- /dev/null
|
||||
+++ b/include/linux/mii.h
|
||||
@@ -0,0 +1,151 @@
|
||||
+/*
|
||||
+ * linux/mii.h: definitions for MII-compatible transceivers
|
||||
+ * Originally drivers/net/sunhme.h.
|
||||
+ *
|
||||
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
|
||||
+ */
|
||||
+
|
||||
+#ifndef __LINUX_MII_H__
|
||||
+#define __LINUX_MII_H__
|
||||
+
|
||||
+#include <linux/types.h>
|
||||
+
|
||||
+/* Generic MII registers. */
|
||||
+#define MII_BMCR 0x00 /* Basic mode control register */
|
||||
+#define MII_BMSR 0x01 /* Basic mode status register */
|
||||
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
|
||||
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
|
||||
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
|
||||
+#define MII_LPA 0x05 /* Link partner ability reg */
|
||||
+#define MII_EXPANSION 0x06 /* Expansion register */
|
||||
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
|
||||
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
|
||||
+#define MII_ESTATUS 0x0f /* Extended Status */
|
||||
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
|
||||
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
|
||||
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
|
||||
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
|
||||
+#define MII_SREVISION 0x16 /* Silicon revision */
|
||||
+#define MII_RESV1 0x17 /* Reserved... */
|
||||
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
|
||||
+#define MII_PHYADDR 0x19 /* PHY address */
|
||||
+#define MII_RESV2 0x1a /* Reserved... */
|
||||
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
|
||||
+#define MII_NCONFIG 0x1c /* Network interface config */
|
||||
+
|
||||
+/* Basic mode control register. */
|
||||
+#define BMCR_RESV 0x003f /* Unused... */
|
||||
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
|
||||
+#define BMCR_CTST 0x0080 /* Collision test */
|
||||
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
|
||||
+#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
|
||||
+#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */
|
||||
+#define BMCR_PDOWN 0x0800 /* Enable low power state */
|
||||
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
|
||||
+#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
|
||||
+#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
|
||||
+#define BMCR_RESET 0x8000 /* Reset to default state */
|
||||
+
|
||||
+/* Basic mode status register. */
|
||||
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
|
||||
+#define BMSR_JCD 0x0002 /* Jabber detected */
|
||||
+#define BMSR_LSTATUS 0x0004 /* Link status */
|
||||
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
|
||||
+#define BMSR_RFAULT 0x0010 /* Remote fault detected */
|
||||
+#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
|
||||
+#define BMSR_RESV 0x00c0 /* Unused... */
|
||||
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
|
||||
+#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
|
||||
+#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
|
||||
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
|
||||
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
|
||||
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
|
||||
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
|
||||
+#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
|
||||
+
|
||||
+/* Advertisement control register. */
|
||||
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
|
||||
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
|
||||
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
|
||||
+#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
|
||||
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
|
||||
+#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
|
||||
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
|
||||
+#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
|
||||
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
|
||||
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
|
||||
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
|
||||
+#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
|
||||
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
|
||||
+#define ADVERTISE_RESV 0x1000 /* Unused... */
|
||||
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
|
||||
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
|
||||
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
|
||||
+
|
||||
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
|
||||
+ ADVERTISE_CSMA)
|
||||
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
|
||||
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
|
||||
+
|
||||
+/* Link partner ability register. */
|
||||
+#define LPA_SLCT 0x001f /* Same as advertise selector */
|
||||
+#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
|
||||
+#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
|
||||
+#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
|
||||
+#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
|
||||
+#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
|
||||
+#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
|
||||
+#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
|
||||
+#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
|
||||
+#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
|
||||
+#define LPA_PAUSE_CAP 0x0400 /* Can pause */
|
||||
+#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
|
||||
+#define LPA_RESV 0x1000 /* Unused... */
|
||||
+#define LPA_RFAULT 0x2000 /* Link partner faulted */
|
||||
+#define LPA_LPACK 0x4000 /* Link partner acked us */
|
||||
+#define LPA_NPAGE 0x8000 /* Next page bit */
|
||||
+
|
||||
+#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
|
||||
+#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
|
||||
+
|
||||
+/* Expansion register for auto-negotiation. */
|
||||
+#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
|
||||
+#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
|
||||
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
|
||||
+#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
|
||||
+#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
|
||||
+#define EXPANSION_RESV 0xffe0 /* Unused... */
|
||||
+
|
||||
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
|
||||
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
|
||||
+
|
||||
+/* N-way test register. */
|
||||
+#define NWAYTEST_RESV1 0x00ff /* Unused... */
|
||||
+#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
|
||||
+#define NWAYTEST_RESV2 0xfe00 /* Unused... */
|
||||
+
|
||||
+/* 1000BASE-T Control register */
|
||||
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
|
||||
+#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
|
||||
+#define CTL1000_AS_MASTER 0x0800
|
||||
+#define CTL1000_ENABLE_MASTER 0x1000
|
||||
+
|
||||
+/* 1000BASE-T Status register */
|
||||
+#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
|
||||
+#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
|
||||
+#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
|
||||
+#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
|
||||
+
|
||||
+/* Flow control flags */
|
||||
+#define FLOW_CTRL_TX 0x01
|
||||
+#define FLOW_CTRL_RX 0x02
|
||||
+
|
||||
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
|
||||
+struct mii_ioctl_data {
|
||||
+ __u16 phy_id;
|
||||
+ __u16 reg_num;
|
||||
+ __u16 val_in;
|
||||
+ __u16 val_out;
|
||||
+};
|
||||
+
|
||||
+#endif /* __LINUX_MII_H__ */
|
||||
--
|
||||
2.5.3
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue