Repo created

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/aec_dump.cc

@@ -0,0 +1,41 @@
+/*
+ *  Copyright (c) 2017 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include "modules/audio_processing/include/aec_dump.h"
+
+namespace webrtc {
+InternalAPMConfig::InternalAPMConfig() = default;
+InternalAPMConfig::InternalAPMConfig(const InternalAPMConfig&) = default;
+InternalAPMConfig::InternalAPMConfig(InternalAPMConfig&&) = default;
+InternalAPMConfig& InternalAPMConfig::operator=(const InternalAPMConfig&) =
+    default;
+
+bool InternalAPMConfig::operator==(const InternalAPMConfig& other) const {
+  return aec_enabled == other.aec_enabled &&
+         aec_delay_agnostic_enabled == other.aec_delay_agnostic_enabled &&
+         aec_drift_compensation_enabled ==
+             other.aec_drift_compensation_enabled &&
+         aec_extended_filter_enabled == other.aec_extended_filter_enabled &&
+         aec_suppression_level == other.aec_suppression_level &&
+         aecm_enabled == other.aecm_enabled &&
+         aecm_comfort_noise_enabled == other.aecm_comfort_noise_enabled &&
+         aecm_routing_mode == other.aecm_routing_mode &&
+         agc_enabled == other.agc_enabled && agc_mode == other.agc_mode &&
+         agc_limiter_enabled == other.agc_limiter_enabled &&
+         hpf_enabled == other.hpf_enabled && ns_enabled == other.ns_enabled &&
+         ns_level == other.ns_level &&
+         transient_suppression_enabled == other.transient_suppression_enabled &&
+         noise_robust_agc_enabled == other.noise_robust_agc_enabled &&
+         pre_amplifier_enabled == other.pre_amplifier_enabled &&
+         pre_amplifier_fixed_gain_factor ==
+             other.pre_amplifier_fixed_gain_factor &&
+         experiments_description == other.experiments_description;
+}
+}  // namespace webrtc

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/aec_dump.h

@@ -0,0 +1,116 @@
+/*
+ *  Copyright (c) 2017 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_AEC_DUMP_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_AEC_DUMP_H_
+
+#include <stdint.h>
+
+#include <string>
+
+#include "absl/base/attributes.h"
+#include "absl/types/optional.h"
+#include "modules/audio_processing/include/audio_frame_view.h"
+#include "modules/audio_processing/include/audio_processing.h"
+
+namespace webrtc {
+
+// Struct for passing current config from APM without having to
+// include protobuf headers.
+struct InternalAPMConfig {
+  InternalAPMConfig();
+  InternalAPMConfig(const InternalAPMConfig&);
+  InternalAPMConfig(InternalAPMConfig&&);
+
+  InternalAPMConfig& operator=(const InternalAPMConfig&);
+  InternalAPMConfig& operator=(InternalAPMConfig&&) = delete;
+
+  bool operator==(const InternalAPMConfig& other) const;
+
+  bool aec_enabled = false;
+  bool aec_delay_agnostic_enabled = false;
+  bool aec_drift_compensation_enabled = false;
+  bool aec_extended_filter_enabled = false;
+  int aec_suppression_level = 0;
+  bool aecm_enabled = false;
+  bool aecm_comfort_noise_enabled = false;
+  int aecm_routing_mode = 0;
+  bool agc_enabled = false;
+  int agc_mode = 0;
+  bool agc_limiter_enabled = false;
+  bool hpf_enabled = false;
+  bool ns_enabled = false;
+  int ns_level = 0;
+  bool transient_suppression_enabled = false;
+  bool noise_robust_agc_enabled = false;
+  bool pre_amplifier_enabled = false;
+  float pre_amplifier_fixed_gain_factor = 1.f;
+  std::string experiments_description = "";
+};
+
+// An interface for recording configuration and input/output streams
+// of the Audio Processing Module. The recordings are called
+// 'aec-dumps' and are stored in a protobuf format defined in
+// debug.proto.
+// The Write* methods are always safe to call concurrently or
+// otherwise for all implementing subclasses. The intended mode of
+// operation is to create a protobuf object from the input, and send
+// it away to be written to file asynchronously.
+class AecDump {
+ public:
+  struct AudioProcessingState {
+    int delay;
+    int drift;
+    absl::optional<int> applied_input_volume;
+    bool keypress;
+  };
+
+  virtual ~AecDump() = default;
+
+  // Logs Event::Type INIT message.
+  virtual void WriteInitMessage(const ProcessingConfig& api_format,
+                                int64_t time_now_ms) = 0;
+  ABSL_DEPRECATED("")
+  void WriteInitMessage(const ProcessingConfig& api_format) {
+    WriteInitMessage(api_format, 0);
+  }
+
+  // Logs Event::Type STREAM message. To log an input/output pair,
+  // call the AddCapture* and AddAudioProcessingState methods followed
+  // by a WriteCaptureStreamMessage call.
+  virtual void AddCaptureStreamInput(
+      const AudioFrameView<const float>& src) = 0;
+  virtual void AddCaptureStreamOutput(
+      const AudioFrameView<const float>& src) = 0;
+  virtual void AddCaptureStreamInput(const int16_t* const data,
+                                     int num_channels,
+                                     int samples_per_channel) = 0;
+  virtual void AddCaptureStreamOutput(const int16_t* const data,
+                                      int num_channels,
+                                      int samples_per_channel) = 0;
+  virtual void AddAudioProcessingState(const AudioProcessingState& state) = 0;
+  virtual void WriteCaptureStreamMessage() = 0;
+
+  // Logs Event::Type REVERSE_STREAM message.
+  virtual void WriteRenderStreamMessage(const int16_t* const data,
+                                        int num_channels,
+                                        int samples_per_channel) = 0;
+  virtual void WriteRenderStreamMessage(
+      const AudioFrameView<const float>& src) = 0;
+
+  virtual void WriteRuntimeSetting(
+      const AudioProcessing::RuntimeSetting& runtime_setting) = 0;
+
+  // Logs Event::Type CONFIG message.
+  virtual void WriteConfig(const InternalAPMConfig& config) = 0;
+};
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_AEC_DUMP_H_

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_frame_proxies.cc

@@ -0,0 +1,66 @@
+/*
+ *  Copyright (c) 2020 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include "modules/audio_processing/include/audio_frame_proxies.h"
+
+#include "api/audio/audio_frame.h"
+#include "modules/audio_processing/include/audio_processing.h"
+
+namespace webrtc {
+
+int ProcessAudioFrame(AudioProcessing* ap, AudioFrame* frame) {
+  if (!frame || !ap) {
+    return AudioProcessing::Error::kNullPointerError;
+  }
+
+  StreamConfig input_config(frame->sample_rate_hz_, frame->num_channels_);
+  StreamConfig output_config(frame->sample_rate_hz_, frame->num_channels_);
+  RTC_DCHECK_EQ(frame->samples_per_channel(), input_config.num_frames());
+
+  int result = ap->ProcessStream(frame->data(), input_config, output_config,
+                                 frame->mutable_data());
+
+  AudioProcessingStats stats = ap->GetStatistics();
+
+  if (stats.voice_detected) {
+    frame->vad_activity_ = *stats.voice_detected
+                               ? AudioFrame::VADActivity::kVadActive
+                               : AudioFrame::VADActivity::kVadPassive;
+  }
+
+  return result;
+}
+
+int ProcessReverseAudioFrame(AudioProcessing* ap, AudioFrame* frame) {
+  if (!frame || !ap) {
+    return AudioProcessing::Error::kNullPointerError;
+  }
+
+  // Must be a native rate.
+  if (frame->sample_rate_hz_ != AudioProcessing::NativeRate::kSampleRate8kHz &&
+      frame->sample_rate_hz_ != AudioProcessing::NativeRate::kSampleRate16kHz &&
+      frame->sample_rate_hz_ != AudioProcessing::NativeRate::kSampleRate32kHz &&
+      frame->sample_rate_hz_ != AudioProcessing::NativeRate::kSampleRate48kHz) {
+    return AudioProcessing::Error::kBadSampleRateError;
+  }
+
+  if (frame->num_channels_ <= 0) {
+    return AudioProcessing::Error::kBadNumberChannelsError;
+  }
+
+  StreamConfig input_config(frame->sample_rate_hz_, frame->num_channels_);
+  StreamConfig output_config(frame->sample_rate_hz_, frame->num_channels_);
+
+  int result = ap->ProcessReverseStream(frame->data(), input_config,
+                                        output_config, frame->mutable_data());
+  return result;
+}
+
+}  // namespace webrtc

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_frame_proxies.h

@@ -0,0 +1,41 @@
+/*
+ *  Copyright (c) 2020 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_PROXIES_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_PROXIES_H_
+
+namespace webrtc {
+
+class AudioFrame;
+class AudioProcessing;
+
+// Processes a 10 ms `frame` of the primary audio stream using the provided
+// AudioProcessing object. On the client-side, this is the near-end (or
+// captured) audio. The `sample_rate_hz_`, `num_channels_`, and
+// `samples_per_channel_` members of `frame` must be valid. If changed from the
+// previous call to this function, it will trigger an initialization of the
+// provided AudioProcessing object.
+// The function returns any error codes passed from the AudioProcessing
+// ProcessStream method.
+int ProcessAudioFrame(AudioProcessing* ap, AudioFrame* frame);
+
+// Processes a 10 ms `frame` of the reverse direction audio stream using the
+// provided AudioProcessing object. The frame may be modified. On the
+// client-side, this is the far-end (or to be rendered) audio. The
+// `sample_rate_hz_`, `num_channels_`, and `samples_per_channel_` members of
+// `frame` must be valid. If changed from the previous call to this function, it
+// will trigger an initialization of the provided AudioProcessing object.
+// The function returns any error codes passed from the AudioProcessing
+// ProcessReverseStream method.
+int ProcessReverseAudioFrame(AudioProcessing* ap, AudioFrame* frame);
+
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_PROXIES_H_

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_frame_view.h

@@ -0,0 +1,68 @@
+/*
+ *  Copyright (c) 2018 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_VIEW_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_VIEW_H_
+
+#include "api/array_view.h"
+
+namespace webrtc {
+
+// Class to pass audio data in T** format, where T is a numeric type.
+template <class T>
+class AudioFrameView {
+ public:
+  // `num_channels` and `channel_size` describe the T**
+  // `audio_samples`. `audio_samples` is assumed to point to a
+  // two-dimensional |num_channels * channel_size| array of floats.
+  AudioFrameView(T* const* audio_samples, int num_channels, int channel_size)
+      : audio_samples_(audio_samples),
+        num_channels_(num_channels),
+        channel_size_(channel_size) {
+    RTC_DCHECK_GE(num_channels_, 0);
+    RTC_DCHECK_GE(channel_size_, 0);
+  }
+
+  // Implicit cast to allow converting Frame<float> to
+  // Frame<const float>.
+  template <class U>
+  AudioFrameView(AudioFrameView<U> other)
+      : audio_samples_(other.data()),
+        num_channels_(other.num_channels()),
+        channel_size_(other.samples_per_channel()) {}
+
+  AudioFrameView() = delete;
+
+  int num_channels() const { return num_channels_; }
+
+  int samples_per_channel() const { return channel_size_; }
+
+  rtc::ArrayView<T> channel(int idx) {
+    RTC_DCHECK_LE(0, idx);
+    RTC_DCHECK_LE(idx, num_channels_);
+    return rtc::ArrayView<T>(audio_samples_[idx], channel_size_);
+  }
+
+  rtc::ArrayView<const T> channel(int idx) const {
+    RTC_DCHECK_LE(0, idx);
+    RTC_DCHECK_LE(idx, num_channels_);
+    return rtc::ArrayView<const T>(audio_samples_[idx], channel_size_);
+  }
+
+  T* const* data() { return audio_samples_; }
+
+ private:
+  T* const* audio_samples_;
+  int num_channels_;
+  int channel_size_;
+};
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_FRAME_VIEW_H_

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_processing.cc

@@ -0,0 +1,210 @@
+/*
+ *  Copyright (c) 2016 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include "modules/audio_processing/include/audio_processing.h"
+
+#include "rtc_base/strings/string_builder.h"
+#include "rtc_base/system/arch.h"
+
+namespace webrtc {
+namespace {
+
+using Agc1Config = AudioProcessing::Config::GainController1;
+using Agc2Config = AudioProcessing::Config::GainController2;
+
+std::string NoiseSuppressionLevelToString(
+    const AudioProcessing::Config::NoiseSuppression::Level& level) {
+  switch (level) {
+    case AudioProcessing::Config::NoiseSuppression::Level::kLow:
+      return "Low";
+    case AudioProcessing::Config::NoiseSuppression::Level::kModerate:
+      return "Moderate";
+    case AudioProcessing::Config::NoiseSuppression::Level::kHigh:
+      return "High";
+    case AudioProcessing::Config::NoiseSuppression::Level::kVeryHigh:
+      return "VeryHigh";
+  }
+  RTC_CHECK_NOTREACHED();
+}
+
+std::string GainController1ModeToString(const Agc1Config::Mode& mode) {
+  switch (mode) {
+    case Agc1Config::Mode::kAdaptiveAnalog:
+      return "AdaptiveAnalog";
+    case Agc1Config::Mode::kAdaptiveDigital:
+      return "AdaptiveDigital";
+    case Agc1Config::Mode::kFixedDigital:
+      return "FixedDigital";
+  }
+  RTC_CHECK_NOTREACHED();
+}
+
+}  // namespace
+
+constexpr int AudioProcessing::kNativeSampleRatesHz[];
+
+void CustomProcessing::SetRuntimeSetting(
+    AudioProcessing::RuntimeSetting setting) {}
+
+bool Agc1Config::operator==(const Agc1Config& rhs) const {
+  const auto& analog_lhs = analog_gain_controller;
+  const auto& analog_rhs = rhs.analog_gain_controller;
+  return enabled == rhs.enabled && mode == rhs.mode &&
+         target_level_dbfs == rhs.target_level_dbfs &&
+         compression_gain_db == rhs.compression_gain_db &&
+         enable_limiter == rhs.enable_limiter &&
+         analog_lhs.enabled == analog_rhs.enabled &&
+         analog_lhs.startup_min_volume == analog_rhs.startup_min_volume &&
+         analog_lhs.clipped_level_min == analog_rhs.clipped_level_min &&
+         analog_lhs.enable_digital_adaptive ==
+             analog_rhs.enable_digital_adaptive &&
+         analog_lhs.clipped_level_step == analog_rhs.clipped_level_step &&
+         analog_lhs.clipped_ratio_threshold ==
+             analog_rhs.clipped_ratio_threshold &&
+         analog_lhs.clipped_wait_frames == analog_rhs.clipped_wait_frames &&
+         analog_lhs.clipping_predictor.mode ==
+             analog_rhs.clipping_predictor.mode &&
+         analog_lhs.clipping_predictor.window_length ==
+             analog_rhs.clipping_predictor.window_length &&
+         analog_lhs.clipping_predictor.reference_window_length ==
+             analog_rhs.clipping_predictor.reference_window_length &&
+         analog_lhs.clipping_predictor.reference_window_delay ==
+             analog_rhs.clipping_predictor.reference_window_delay &&
+         analog_lhs.clipping_predictor.clipping_threshold ==
+             analog_rhs.clipping_predictor.clipping_threshold &&
+         analog_lhs.clipping_predictor.crest_factor_margin ==
+             analog_rhs.clipping_predictor.crest_factor_margin &&
+         analog_lhs.clipping_predictor.use_predicted_step ==
+             analog_rhs.clipping_predictor.use_predicted_step;
+}
+
+bool Agc2Config::AdaptiveDigital::operator==(
+    const Agc2Config::AdaptiveDigital& rhs) const {
+  return enabled == rhs.enabled && headroom_db == rhs.headroom_db &&
+         max_gain_db == rhs.max_gain_db &&
+         initial_gain_db == rhs.initial_gain_db &&
+         max_gain_change_db_per_second == rhs.max_gain_change_db_per_second &&
+         max_output_noise_level_dbfs == rhs.max_output_noise_level_dbfs;
+}
+
+bool Agc2Config::InputVolumeController::operator==(
+    const Agc2Config::InputVolumeController& rhs) const {
+  return enabled == rhs.enabled;
+}
+
+bool Agc2Config::operator==(const Agc2Config& rhs) const {
+  return enabled == rhs.enabled &&
+         fixed_digital.gain_db == rhs.fixed_digital.gain_db &&
+         adaptive_digital == rhs.adaptive_digital &&
+         input_volume_controller == rhs.input_volume_controller;
+}
+
+bool AudioProcessing::Config::CaptureLevelAdjustment::operator==(
+    const AudioProcessing::Config::CaptureLevelAdjustment& rhs) const {
+  return enabled == rhs.enabled && pre_gain_factor == rhs.pre_gain_factor &&
+         post_gain_factor == rhs.post_gain_factor &&
+         analog_mic_gain_emulation == rhs.analog_mic_gain_emulation;
+}
+
+bool AudioProcessing::Config::CaptureLevelAdjustment::AnalogMicGainEmulation::
+operator==(const AudioProcessing::Config::CaptureLevelAdjustment::
+               AnalogMicGainEmulation& rhs) const {
+  return enabled == rhs.enabled && initial_level == rhs.initial_level;
+}
+
+std::string AudioProcessing::Config::ToString() const {
+  char buf[2048];
+  rtc::SimpleStringBuilder builder(buf);
+  builder << "AudioProcessing::Config{ "
+             "pipeline: { "
+             "maximum_internal_processing_rate: "
+          << pipeline.maximum_internal_processing_rate
+          << ", multi_channel_render: " << pipeline.multi_channel_render
+          << ", multi_channel_capture: " << pipeline.multi_channel_capture
+          << " }, pre_amplifier: { enabled: " << pre_amplifier.enabled
+          << ", fixed_gain_factor: " << pre_amplifier.fixed_gain_factor
+          << " },capture_level_adjustment: { enabled: "
+          << capture_level_adjustment.enabled
+          << ", pre_gain_factor: " << capture_level_adjustment.pre_gain_factor
+          << ", post_gain_factor: " << capture_level_adjustment.post_gain_factor
+          << ", analog_mic_gain_emulation: { enabled: "
+          << capture_level_adjustment.analog_mic_gain_emulation.enabled
+          << ", initial_level: "
+          << capture_level_adjustment.analog_mic_gain_emulation.initial_level
+          << " }}, high_pass_filter: { enabled: " << high_pass_filter.enabled
+          << " }, echo_canceller: { enabled: " << echo_canceller.enabled
+          << ", mobile_mode: " << echo_canceller.mobile_mode
+          << ", enforce_high_pass_filtering: "
+          << echo_canceller.enforce_high_pass_filtering
+          << " }, noise_suppression: { enabled: " << noise_suppression.enabled
+          << ", level: "
+          << NoiseSuppressionLevelToString(noise_suppression.level)
+          << " }, transient_suppression: { enabled: "
+          << transient_suppression.enabled
+          << " }, gain_controller1: { enabled: " << gain_controller1.enabled
+          << ", mode: " << GainController1ModeToString(gain_controller1.mode)
+          << ", target_level_dbfs: " << gain_controller1.target_level_dbfs
+          << ", compression_gain_db: " << gain_controller1.compression_gain_db
+          << ", enable_limiter: " << gain_controller1.enable_limiter
+          << ", analog_gain_controller { enabled: "
+          << gain_controller1.analog_gain_controller.enabled
+          << ", startup_min_volume: "
+          << gain_controller1.analog_gain_controller.startup_min_volume
+          << ", clipped_level_min: "
+          << gain_controller1.analog_gain_controller.clipped_level_min
+          << ", enable_digital_adaptive: "
+          << gain_controller1.analog_gain_controller.enable_digital_adaptive
+          << ", clipped_level_step: "
+          << gain_controller1.analog_gain_controller.clipped_level_step
+          << ", clipped_ratio_threshold: "
+          << gain_controller1.analog_gain_controller.clipped_ratio_threshold
+          << ", clipped_wait_frames: "
+          << gain_controller1.analog_gain_controller.clipped_wait_frames
+          << ", clipping_predictor:  { enabled: "
+          << gain_controller1.analog_gain_controller.clipping_predictor.enabled
+          << ", mode: "
+          << gain_controller1.analog_gain_controller.clipping_predictor.mode
+          << ", window_length: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .window_length
+          << ", reference_window_length: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .reference_window_length
+          << ", reference_window_delay: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .reference_window_delay
+          << ", clipping_threshold: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .clipping_threshold
+          << ", crest_factor_margin: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .crest_factor_margin
+          << ", use_predicted_step: "
+          << gain_controller1.analog_gain_controller.clipping_predictor
+                 .use_predicted_step
+          << " }}}, gain_controller2: { enabled: " << gain_controller2.enabled
+          << ", fixed_digital: { gain_db: "
+          << gain_controller2.fixed_digital.gain_db
+          << " }, adaptive_digital: { enabled: "
+          << gain_controller2.adaptive_digital.enabled
+          << ", headroom_db: " << gain_controller2.adaptive_digital.headroom_db
+          << ", max_gain_db: " << gain_controller2.adaptive_digital.max_gain_db
+          << ", initial_gain_db: "
+          << gain_controller2.adaptive_digital.initial_gain_db
+          << ", max_gain_change_db_per_second: "
+          << gain_controller2.adaptive_digital.max_gain_change_db_per_second
+          << ", max_output_noise_level_dbfs: "
+          << gain_controller2.adaptive_digital.max_output_noise_level_dbfs
+          << " }, input_volume_control : { enabled "
+          << gain_controller2.input_volume_controller.enabled << "}}";
+  return builder.str();
+}
+
+}  // namespace webrtc

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_processing.h

@@ -0,0 +1,941 @@
+/*
+ *  Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_H_
+
+// MSVC++ requires this to be set before any other includes to get M_PI.
+#ifndef _USE_MATH_DEFINES
+#define _USE_MATH_DEFINES
+#endif
+
+#include <math.h>
+#include <stddef.h>  // size_t
+#include <stdio.h>   // FILE
+#include <string.h>
+
+#include <vector>
+
+#include "absl/base/nullability.h"
+#include "absl/strings/string_view.h"
+#include "absl/types/optional.h"
+#include "api/array_view.h"
+#include "api/audio/echo_canceller3_config.h"
+#include "api/audio/echo_control.h"
+#include "api/ref_count.h"
+#include "api/scoped_refptr.h"
+#include "api/task_queue/task_queue_base.h"
+#include "modules/audio_processing/include/audio_processing_statistics.h"
+#include "rtc_base/arraysize.h"
+#include "rtc_base/system/file_wrapper.h"
+#include "rtc_base/system/rtc_export.h"
+
+namespace webrtc {
+
+class AecDump;
+class AudioBuffer;
+
+class StreamConfig;
+class ProcessingConfig;
+
+class EchoDetector;
+class CustomAudioAnalyzer;
+class CustomProcessing;
+
+// The Audio Processing Module (APM) provides a collection of voice processing
+// components designed for real-time communications software.
+//
+// APM operates on two audio streams on a frame-by-frame basis. Frames of the
+// primary stream, on which all processing is applied, are passed to
+// `ProcessStream()`. Frames of the reverse direction stream are passed to
+// `ProcessReverseStream()`. On the client-side, this will typically be the
+// near-end (capture) and far-end (render) streams, respectively. APM should be
+// placed in the signal chain as close to the audio hardware abstraction layer
+// (HAL) as possible.
+//
+// On the server-side, the reverse stream will normally not be used, with
+// processing occurring on each incoming stream.
+//
+// Component interfaces follow a similar pattern and are accessed through
+// corresponding getters in APM. All components are disabled at create-time,
+// with default settings that are recommended for most situations. New settings
+// can be applied without enabling a component. Enabling a component triggers
+// memory allocation and initialization to allow it to start processing the
+// streams.
+//
+// Thread safety is provided with the following assumptions to reduce locking
+// overhead:
+//   1. The stream getters and setters are called from the same thread as
+//      ProcessStream(). More precisely, stream functions are never called
+//      concurrently with ProcessStream().
+//   2. Parameter getters are never called concurrently with the corresponding
+//      setter.
+//
+// APM accepts only linear PCM audio data in chunks of ~10 ms (see
+// AudioProcessing::GetFrameSize() for details) and sample rates ranging from
+// 8000 Hz to 384000 Hz. The int16 interfaces use interleaved data, while the
+// float interfaces use deinterleaved data.
+//
+// Usage example, omitting error checking:
+// rtc::scoped_refptr<AudioProcessing> apm = AudioProcessingBuilder().Create();
+//
+// AudioProcessing::Config config;
+// config.echo_canceller.enabled = true;
+// config.echo_canceller.mobile_mode = false;
+//
+// config.gain_controller1.enabled = true;
+// config.gain_controller1.mode =
+// AudioProcessing::Config::GainController1::kAdaptiveAnalog;
+// config.gain_controller1.analog_level_minimum = 0;
+// config.gain_controller1.analog_level_maximum = 255;
+//
+// config.gain_controller2.enabled = true;
+//
+// config.high_pass_filter.enabled = true;
+//
+// apm->ApplyConfig(config)
+//
+// // Start a voice call...
+//
+// // ... Render frame arrives bound for the audio HAL ...
+// apm->ProcessReverseStream(render_frame);
+//
+// // ... Capture frame arrives from the audio HAL ...
+// // Call required set_stream_ functions.
+// apm->set_stream_delay_ms(delay_ms);
+// apm->set_stream_analog_level(analog_level);
+//
+// apm->ProcessStream(capture_frame);
+//
+// // Call required stream_ functions.
+// analog_level = apm->recommended_stream_analog_level();
+// has_voice = apm->stream_has_voice();
+//
+// // Repeat render and capture processing for the duration of the call...
+// // Start a new call...
+// apm->Initialize();
+//
+// // Close the application...
+// apm.reset();
+//
+class RTC_EXPORT AudioProcessing : public RefCountInterface {
+ public:
+  // The struct below constitutes the new parameter scheme for the audio
+  // processing. It is being introduced gradually and until it is fully
+  // introduced, it is prone to change.
+  // TODO(peah): Remove this comment once the new config scheme is fully rolled
+  // out.
+  //
+  // The parameters and behavior of the audio processing module are controlled
+  // by changing the default values in the AudioProcessing::Config struct.
+  // The config is applied by passing the struct to the ApplyConfig method.
+  //
+  // This config is intended to be used during setup, and to enable/disable
+  // top-level processing effects. Use during processing may cause undesired
+  // submodule resets, affecting the audio quality. Use the RuntimeSetting
+  // construct for runtime configuration.
+  struct RTC_EXPORT Config {
+    // Sets the properties of the audio processing pipeline.
+    struct RTC_EXPORT Pipeline {
+      // Ways to downmix a multi-channel track to mono.
+      enum class DownmixMethod {
+        kAverageChannels,  // Average across channels.
+        kUseFirstChannel   // Use the first channel.
+      };
+
+      // Maximum allowed processing rate used internally. May only be set to
+      // 32000 or 48000 and any differing values will be treated as 48000.
+      int maximum_internal_processing_rate = 48000;
+      // Allow multi-channel processing of render audio.
+      bool multi_channel_render = false;
+      // Allow multi-channel processing of capture audio when AEC3 is active
+      // or a custom AEC is injected..
+      bool multi_channel_capture = false;
+      // Indicates how to downmix multi-channel capture audio to mono (when
+      // needed).
+      DownmixMethod capture_downmix_method = DownmixMethod::kAverageChannels;
+    } pipeline;
+
+    // Enabled the pre-amplifier. It amplifies the capture signal
+    // before any other processing is done.
+    // TODO(webrtc:5298): Deprecate and use the pre-gain functionality in
+    // capture_level_adjustment instead.
+    struct PreAmplifier {
+      bool enabled = false;
+      float fixed_gain_factor = 1.0f;
+    } pre_amplifier;
+
+    // Functionality for general level adjustment in the capture pipeline. This
+    // should not be used together with the legacy PreAmplifier functionality.
+    struct CaptureLevelAdjustment {
+      bool operator==(const CaptureLevelAdjustment& rhs) const;
+      bool operator!=(const CaptureLevelAdjustment& rhs) const {
+        return !(*this == rhs);
+      }
+      bool enabled = false;
+      // The `pre_gain_factor` scales the signal before any processing is done.
+      float pre_gain_factor = 1.0f;
+      // The `post_gain_factor` scales the signal after all processing is done.
+      float post_gain_factor = 1.0f;
+      struct AnalogMicGainEmulation {
+        bool operator==(const AnalogMicGainEmulation& rhs) const;
+        bool operator!=(const AnalogMicGainEmulation& rhs) const {
+          return !(*this == rhs);
+        }
+        bool enabled = false;
+        // Initial analog gain level to use for the emulated analog gain. Must
+        // be in the range [0...255].
+        int initial_level = 255;
+      } analog_mic_gain_emulation;
+    } capture_level_adjustment;
+
+    struct HighPassFilter {
+      bool enabled = false;
+      bool apply_in_full_band = true;
+    } high_pass_filter;
+
+    struct EchoCanceller {
+      bool enabled = false;
+      bool mobile_mode = false;
+      bool export_linear_aec_output = false;
+      // Enforce the highpass filter to be on (has no effect for the mobile
+      // mode).
+      bool enforce_high_pass_filtering = true;
+    } echo_canceller;
+
+    // Enables background noise suppression.
+    struct NoiseSuppression {
+      bool enabled = false;
+      enum Level { kLow, kModerate, kHigh, kVeryHigh };
+      Level level = kModerate;
+      bool analyze_linear_aec_output_when_available = false;
+    } noise_suppression;
+
+    // Enables transient suppression.
+    struct TransientSuppression {
+      bool enabled = false;
+    } transient_suppression;
+
+    // Enables automatic gain control (AGC) functionality.
+    // The automatic gain control (AGC) component brings the signal to an
+    // appropriate range. This is done by applying a digital gain directly and,
+    // in the analog mode, prescribing an analog gain to be applied at the audio
+    // HAL.
+    // Recommended to be enabled on the client-side.
+    struct RTC_EXPORT GainController1 {
+      bool operator==(const GainController1& rhs) const;
+      bool operator!=(const GainController1& rhs) const {
+        return !(*this == rhs);
+      }
+
+      bool enabled = false;
+      enum Mode {
+        // Adaptive mode intended for use if an analog volume control is
+        // available on the capture device. It will require the user to provide
+        // coupling between the OS mixer controls and AGC through the
+        // stream_analog_level() functions.
+        // It consists of an analog gain prescription for the audio device and a
+        // digital compression stage.
+        kAdaptiveAnalog,
+        // Adaptive mode intended for situations in which an analog volume
+        // control is unavailable. It operates in a similar fashion to the
+        // adaptive analog mode, but with scaling instead applied in the digital
+        // domain. As with the analog mode, it additionally uses a digital
+        // compression stage.
+        kAdaptiveDigital,
+        // Fixed mode which enables only the digital compression stage also used
+        // by the two adaptive modes.
+        // It is distinguished from the adaptive modes by considering only a
+        // short time-window of the input signal. It applies a fixed gain
+        // through most of the input level range, and compresses (gradually
+        // reduces gain with increasing level) the input signal at higher
+        // levels. This mode is preferred on embedded devices where the capture
+        // signal level is predictable, so that a known gain can be applied.
+        kFixedDigital
+      };
+      Mode mode = kAdaptiveAnalog;
+      // Sets the target peak level (or envelope) of the AGC in dBFs (decibels
+      // from digital full-scale). The convention is to use positive values. For
+      // instance, passing in a value of 3 corresponds to -3 dBFs, or a target
+      // level 3 dB below full-scale. Limited to [0, 31].
+      int target_level_dbfs = 3;
+      // Sets the maximum gain the digital compression stage may apply, in dB. A
+      // higher number corresponds to greater compression, while a value of 0
+      // will leave the signal uncompressed. Limited to [0, 90].
+      // For updates after APM setup, use a RuntimeSetting instead.
+      int compression_gain_db = 9;
+      // When enabled, the compression stage will hard limit the signal to the
+      // target level. Otherwise, the signal will be compressed but not limited
+      // above the target level.
+      bool enable_limiter = true;
+
+      // Enables the analog gain controller functionality.
+      struct AnalogGainController {
+        bool enabled = true;
+        // TODO(bugs.webrtc.org/7494): Deprecated. Stop using and remove.
+        int startup_min_volume = 0;
+        // Lowest analog microphone level that will be applied in response to
+        // clipping.
+        int clipped_level_min = 70;
+        // If true, an adaptive digital gain is applied.
+        bool enable_digital_adaptive = true;
+        // Amount the microphone level is lowered with every clipping event.
+        // Limited to (0, 255].
+        int clipped_level_step = 15;
+        // Proportion of clipped samples required to declare a clipping event.
+        // Limited to (0.f, 1.f).
+        float clipped_ratio_threshold = 0.1f;
+        // Time in frames to wait after a clipping event before checking again.
+        // Limited to values higher than 0.
+        int clipped_wait_frames = 300;
+
+        // Enables clipping prediction functionality.
+        struct ClippingPredictor {
+          bool enabled = false;
+          enum Mode {
+            // Clipping event prediction mode with fixed step estimation.
+            kClippingEventPrediction,
+            // Clipped peak estimation mode with adaptive step estimation.
+            kAdaptiveStepClippingPeakPrediction,
+            // Clipped peak estimation mode with fixed step estimation.
+            kFixedStepClippingPeakPrediction,
+          };
+          Mode mode = kClippingEventPrediction;
+          // Number of frames in the sliding analysis window.
+          int window_length = 5;
+          // Number of frames in the sliding reference window.
+          int reference_window_length = 5;
+          // Reference window delay (unit: number of frames).
+          int reference_window_delay = 5;
+          // Clipping prediction threshold (dBFS).
+          float clipping_threshold = -1.0f;
+          // Crest factor drop threshold (dB).
+          float crest_factor_margin = 3.0f;
+          // If true, the recommended clipped level step is used to modify the
+          // analog gain. Otherwise, the predictor runs without affecting the
+          // analog gain.
+          bool use_predicted_step = true;
+        } clipping_predictor;
+      } analog_gain_controller;
+    } gain_controller1;
+
+    // Parameters for AGC2, an Automatic Gain Control (AGC) sub-module which
+    // replaces the AGC sub-module parametrized by `gain_controller1`.
+    // AGC2 brings the captured audio signal to the desired level by combining
+    // three different controllers (namely, input volume controller, adapative
+    // digital controller and fixed digital controller) and a limiter.
+    // TODO(bugs.webrtc.org:7494): Name `GainController` when AGC1 removed.
+    struct RTC_EXPORT GainController2 {
+      bool operator==(const GainController2& rhs) const;
+      bool operator!=(const GainController2& rhs) const {
+        return !(*this == rhs);
+      }
+
+      // AGC2 must be created if and only if `enabled` is true.
+      bool enabled = false;
+
+      // Parameters for the input volume controller, which adjusts the input
+      // volume applied when the audio is captured (e.g., microphone volume on
+      // a soundcard, input volume on HAL).
+      struct InputVolumeController {
+        bool operator==(const InputVolumeController& rhs) const;
+        bool operator!=(const InputVolumeController& rhs) const {
+          return !(*this == rhs);
+        }
+        bool enabled = false;
+      } input_volume_controller;
+
+      // Parameters for the adaptive digital controller, which adjusts and
+      // applies a digital gain after echo cancellation and after noise
+      // suppression.
+      struct RTC_EXPORT AdaptiveDigital {
+        bool operator==(const AdaptiveDigital& rhs) const;
+        bool operator!=(const AdaptiveDigital& rhs) const {
+          return !(*this == rhs);
+        }
+        bool enabled = false;
+        float headroom_db = 6.0f;
+        float max_gain_db = 30.0f;
+        float initial_gain_db = 8.0f;
+        float max_gain_change_db_per_second = 3.0f;
+        float max_output_noise_level_dbfs = -50.0f;
+      } adaptive_digital;
+
+      // Parameters for the fixed digital controller, which applies a fixed
+      // digital gain after the adaptive digital controller and before the
+      // limiter.
+      struct FixedDigital {
+        // By setting `gain_db` to a value greater than zero, the limiter can be
+        // turned into a compressor that first applies a fixed gain.
+        float gain_db = 0.0f;
+      } fixed_digital;
+    } gain_controller2;
+
+    std::string ToString() const;
+  };
+
+  // Specifies the properties of a setting to be passed to AudioProcessing at
+  // runtime.
+  class RuntimeSetting {
+   public:
+    enum class Type {
+      kNotSpecified,
+      kCapturePreGain,
+      kCaptureCompressionGain,
+      kCaptureFixedPostGain,
+      kPlayoutVolumeChange,
+      kCustomRenderProcessingRuntimeSetting,
+      kPlayoutAudioDeviceChange,
+      kCapturePostGain,
+      kCaptureOutputUsed
+    };
+
+    // Play-out audio device properties.
+    struct PlayoutAudioDeviceInfo {
+      int id;          // Identifies the audio device.
+      int max_volume;  // Maximum play-out volume.
+    };
+
+    RuntimeSetting() : type_(Type::kNotSpecified), value_(0.0f) {}
+    ~RuntimeSetting() = default;
+
+    static RuntimeSetting CreateCapturePreGain(float gain) {
+      return {Type::kCapturePreGain, gain};
+    }
+
+    static RuntimeSetting CreateCapturePostGain(float gain) {
+      return {Type::kCapturePostGain, gain};
+    }
+
+    // Corresponds to Config::GainController1::compression_gain_db, but for
+    // runtime configuration.
+    static RuntimeSetting CreateCompressionGainDb(int gain_db) {
+      RTC_DCHECK_GE(gain_db, 0);
+      RTC_DCHECK_LE(gain_db, 90);
+      return {Type::kCaptureCompressionGain, static_cast<float>(gain_db)};
+    }
+
+    // Corresponds to Config::GainController2::fixed_digital::gain_db, but for
+    // runtime configuration.
+    static RuntimeSetting CreateCaptureFixedPostGain(float gain_db) {
+      RTC_DCHECK_GE(gain_db, 0.0f);
+      RTC_DCHECK_LE(gain_db, 90.0f);
+      return {Type::kCaptureFixedPostGain, gain_db};
+    }
+
+    // Creates a runtime setting to notify play-out (aka render) audio device
+    // changes.
+    static RuntimeSetting CreatePlayoutAudioDeviceChange(
+        PlayoutAudioDeviceInfo audio_device) {
+      return {Type::kPlayoutAudioDeviceChange, audio_device};
+    }
+
+    // Creates a runtime setting to notify play-out (aka render) volume changes.
+    // `volume` is the unnormalized volume, the maximum of which
+    static RuntimeSetting CreatePlayoutVolumeChange(int volume) {
+      return {Type::kPlayoutVolumeChange, volume};
+    }
+
+    static RuntimeSetting CreateCustomRenderSetting(float payload) {
+      return {Type::kCustomRenderProcessingRuntimeSetting, payload};
+    }
+
+    static RuntimeSetting CreateCaptureOutputUsedSetting(
+        bool capture_output_used) {
+      return {Type::kCaptureOutputUsed, capture_output_used};
+    }
+
+    Type type() const { return type_; }
+    // Getters do not return a value but instead modify the argument to protect
+    // from implicit casting.
+    void GetFloat(float* value) const {
+      RTC_DCHECK(value);
+      *value = value_.float_value;
+    }
+    void GetInt(int* value) const {
+      RTC_DCHECK(value);
+      *value = value_.int_value;
+    }
+    void GetBool(bool* value) const {
+      RTC_DCHECK(value);
+      *value = value_.bool_value;
+    }
+    void GetPlayoutAudioDeviceInfo(PlayoutAudioDeviceInfo* value) const {
+      RTC_DCHECK(value);
+      *value = value_.playout_audio_device_info;
+    }
+
+   private:
+    RuntimeSetting(Type id, float value) : type_(id), value_(value) {}
+    RuntimeSetting(Type id, int value) : type_(id), value_(value) {}
+    RuntimeSetting(Type id, PlayoutAudioDeviceInfo value)
+        : type_(id), value_(value) {}
+    Type type_;
+    union U {
+      U() {}
+      U(int value) : int_value(value) {}
+      U(float value) : float_value(value) {}
+      U(PlayoutAudioDeviceInfo value) : playout_audio_device_info(value) {}
+      float float_value;
+      int int_value;
+      bool bool_value;
+      PlayoutAudioDeviceInfo playout_audio_device_info;
+    } value_;
+  };
+
+  ~AudioProcessing() override {}
+
+  // Initializes internal states, while retaining all user settings. This
+  // should be called before beginning to process a new audio stream. However,
+  // it is not necessary to call before processing the first stream after
+  // creation.
+  //
+  // It is also not necessary to call if the audio parameters (sample
+  // rate and number of channels) have changed. Passing updated parameters
+  // directly to `ProcessStream()` and `ProcessReverseStream()` is permissible.
+  // If the parameters are known at init-time though, they may be provided.
+  // TODO(webrtc:5298): Change to return void.
+  virtual int Initialize() = 0;
+
+  // The int16 interfaces require:
+  //   - only `NativeRate`s be used
+  //   - that the input, output and reverse rates must match
+  //   - that `processing_config.output_stream()` matches
+  //     `processing_config.input_stream()`.
+  //
+  // The float interfaces accept arbitrary rates and support differing input and
+  // output layouts, but the output must have either one channel or the same
+  // number of channels as the input.
+  virtual int Initialize(const ProcessingConfig& processing_config) = 0;
+
+  // TODO(peah): This method is a temporary solution used to take control
+  // over the parameters in the audio processing module and is likely to change.
+  virtual void ApplyConfig(const Config& config) = 0;
+
+  // TODO(ajm): Only intended for internal use. Make private and friend the
+  // necessary classes?
+  virtual int proc_sample_rate_hz() const = 0;
+  virtual int proc_split_sample_rate_hz() const = 0;
+  virtual size_t num_input_channels() const = 0;
+  virtual size_t num_proc_channels() const = 0;
+  virtual size_t num_output_channels() const = 0;
+  virtual size_t num_reverse_channels() const = 0;
+
+  // Set to true when the output of AudioProcessing will be muted or in some
+  // other way not used. Ideally, the captured audio would still be processed,
+  // but some components may change behavior based on this information.
+  // Default false. This method takes a lock. To achieve this in a lock-less
+  // manner the PostRuntimeSetting can instead be used.
+  virtual void set_output_will_be_muted(bool muted) = 0;
+
+  // Enqueues a runtime setting.
+  virtual void SetRuntimeSetting(RuntimeSetting setting) = 0;
+
+  // Enqueues a runtime setting. Returns a bool indicating whether the
+  // enqueueing was successfull.
+  virtual bool PostRuntimeSetting(RuntimeSetting setting) = 0;
+
+  // Accepts and produces a ~10 ms frame of interleaved 16 bit integer audio as
+  // specified in `input_config` and `output_config`. `src` and `dest` may use
+  // the same memory, if desired.
+  virtual int ProcessStream(const int16_t* const src,
+                            const StreamConfig& input_config,
+                            const StreamConfig& output_config,
+                            int16_t* const dest) = 0;
+
+  // Accepts deinterleaved float audio with the range [-1, 1]. Each element of
+  // `src` points to a channel buffer, arranged according to `input_stream`. At
+  // output, the channels will be arranged according to `output_stream` in
+  // `dest`.
+  //
+  // The output must have one channel or as many channels as the input. `src`
+  // and `dest` may use the same memory, if desired.
+  virtual int ProcessStream(const float* const* src,
+                            const StreamConfig& input_config,
+                            const StreamConfig& output_config,
+                            float* const* dest) = 0;
+
+  // Accepts and produces a ~10 ms frame of interleaved 16 bit integer audio for
+  // the reverse direction audio stream as specified in `input_config` and
+  // `output_config`. `src` and `dest` may use the same memory, if desired.
+  virtual int ProcessReverseStream(const int16_t* const src,
+                                   const StreamConfig& input_config,
+                                   const StreamConfig& output_config,
+                                   int16_t* const dest) = 0;
+
+  // Accepts deinterleaved float audio with the range [-1, 1]. Each element of
+  // `data` points to a channel buffer, arranged according to `reverse_config`.
+  virtual int ProcessReverseStream(const float* const* src,
+                                   const StreamConfig& input_config,
+                                   const StreamConfig& output_config,
+                                   float* const* dest) = 0;
+
+  // Accepts deinterleaved float audio with the range [-1, 1]. Each element
+  // of `data` points to a channel buffer, arranged according to
+  // `reverse_config`.
+  virtual int AnalyzeReverseStream(const float* const* data,
+                                   const StreamConfig& reverse_config) = 0;
+
+  // Returns the most recently produced ~10 ms of the linear AEC output at a
+  // rate of 16 kHz. If there is more than one capture channel, a mono
+  // representation of the input is returned. Returns true/false to indicate
+  // whether an output returned.
+  virtual bool GetLinearAecOutput(
+      rtc::ArrayView<std::array<float, 160>> linear_output) const = 0;
+
+  // This must be called prior to ProcessStream() if and only if adaptive analog
+  // gain control is enabled, to pass the current analog level from the audio
+  // HAL. Must be within the range [0, 255].
+  virtual void set_stream_analog_level(int level) = 0;
+
+  // When an analog mode is set, this should be called after
+  // `set_stream_analog_level()` and `ProcessStream()` to obtain the recommended
+  // new analog level for the audio HAL. It is the user's responsibility to
+  // apply this level.
+  virtual int recommended_stream_analog_level() const = 0;
+
+  // This must be called if and only if echo processing is enabled.
+  //
+  // Sets the `delay` in ms between ProcessReverseStream() receiving a far-end
+  // frame and ProcessStream() receiving a near-end frame containing the
+  // corresponding echo. On the client-side this can be expressed as
+  //   delay = (t_render - t_analyze) + (t_process - t_capture)
+  // where,
+  //   - t_analyze is the time a frame is passed to ProcessReverseStream() and
+  //     t_render is the time the first sample of the same frame is rendered by
+  //     the audio hardware.
+  //   - t_capture is the time the first sample of a frame is captured by the
+  //     audio hardware and t_process is the time the same frame is passed to
+  //     ProcessStream().
+  virtual int set_stream_delay_ms(int delay) = 0;
+  virtual int stream_delay_ms() const = 0;
+
+  // Call to signal that a key press occurred (true) or did not occur (false)
+  // with this chunk of audio.
+  virtual void set_stream_key_pressed(bool key_pressed) = 0;
+
+  // Creates and attaches an webrtc::AecDump for recording debugging
+  // information.
+  // The `worker_queue` may not be null and must outlive the created
+  // AecDump instance. |max_log_size_bytes == -1| means the log size
+  // will be unlimited. `handle` may not be null. The AecDump takes
+  // responsibility for `handle` and closes it in the destructor. A
+  // return value of true indicates that the file has been
+  // sucessfully opened, while a value of false indicates that
+  // opening the file failed.
+  virtual bool CreateAndAttachAecDump(
+      absl::string_view file_name,
+      int64_t max_log_size_bytes,
+      absl::Nonnull<TaskQueueBase*> worker_queue) = 0;
+  virtual bool CreateAndAttachAecDump(
+      absl::Nonnull<FILE*> handle,
+      int64_t max_log_size_bytes,
+      absl::Nonnull<TaskQueueBase*> worker_queue) = 0;
+
+  // TODO(webrtc:5298) Deprecated variant.
+  // Attaches provided webrtc::AecDump for recording debugging
+  // information. Log file and maximum file size logic is supposed to
+  // be handled by implementing instance of AecDump. Calling this
+  // method when another AecDump is attached resets the active AecDump
+  // with a new one. This causes the d-tor of the earlier AecDump to
+  // be called. The d-tor call may block until all pending logging
+  // tasks are completed.
+  virtual void AttachAecDump(std::unique_ptr<AecDump> aec_dump) = 0;
+
+  // If no AecDump is attached, this has no effect. If an AecDump is
+  // attached, it's destructor is called. The d-tor may block until
+  // all pending logging tasks are completed.
+  virtual void DetachAecDump() = 0;
+
+  // Get audio processing statistics.
+  virtual AudioProcessingStats GetStatistics() = 0;
+  // TODO(webrtc:5298) Deprecated variant. The `has_remote_tracks` argument
+  // should be set if there are active remote tracks (this would usually be true
+  // during a call). If there are no remote tracks some of the stats will not be
+  // set by AudioProcessing, because they only make sense if there is at least
+  // one remote track.
+  virtual AudioProcessingStats GetStatistics(bool has_remote_tracks) = 0;
+
+  // Returns the last applied configuration.
+  virtual AudioProcessing::Config GetConfig() const = 0;
+
+  enum Error {
+    // Fatal errors.
+    kNoError = 0,
+    kUnspecifiedError = -1,
+    kCreationFailedError = -2,
+    kUnsupportedComponentError = -3,
+    kUnsupportedFunctionError = -4,
+    kNullPointerError = -5,
+    kBadParameterError = -6,
+    kBadSampleRateError = -7,
+    kBadDataLengthError = -8,
+    kBadNumberChannelsError = -9,
+    kFileError = -10,
+    kStreamParameterNotSetError = -11,
+    kNotEnabledError = -12,
+
+    // Warnings are non-fatal.
+    // This results when a set_stream_ parameter is out of range. Processing
+    // will continue, but the parameter may have been truncated.
+    kBadStreamParameterWarning = -13
+  };
+
+  // Native rates supported by the integer interfaces.
+  enum NativeRate {
+    kSampleRate8kHz = 8000,
+    kSampleRate16kHz = 16000,
+    kSampleRate32kHz = 32000,
+    kSampleRate48kHz = 48000
+  };
+
+  // TODO(kwiberg): We currently need to support a compiler (Visual C++) that
+  // complains if we don't explicitly state the size of the array here. Remove
+  // the size when that's no longer the case.
+  static constexpr int kNativeSampleRatesHz[4] = {
+      kSampleRate8kHz, kSampleRate16kHz, kSampleRate32kHz, kSampleRate48kHz};
+  static constexpr size_t kNumNativeSampleRates =
+      arraysize(kNativeSampleRatesHz);
+  static constexpr int kMaxNativeSampleRateHz =
+      kNativeSampleRatesHz[kNumNativeSampleRates - 1];
+
+  // APM processes audio in chunks of about 10 ms. See GetFrameSize() for
+  // details.
+  static constexpr int kChunkSizeMs = 10;
+
+  // Returns floor(sample_rate_hz/100): the number of samples per channel used
+  // as input and output to the audio processing module in calls to
+  // ProcessStream, ProcessReverseStream, AnalyzeReverseStream, and
+  // GetLinearAecOutput.
+  //
+  // This is exactly 10 ms for sample rates divisible by 100. For example:
+  //  - 48000 Hz (480 samples per channel),
+  //  - 44100 Hz (441 samples per channel),
+  //  - 16000 Hz (160 samples per channel).
+  //
+  // Sample rates not divisible by 100 are received/produced in frames of
+  // approximately 10 ms. For example:
+  //  - 22050 Hz (220 samples per channel, or ~9.98 ms per frame),
+  //  - 11025 Hz (110 samples per channel, or ~9.98 ms per frame).
+  // These nondivisible sample rates yield lower audio quality compared to
+  // multiples of 100. Internal resampling to 10 ms frames causes a simulated
+  // clock drift effect which impacts the performance of (for example) echo
+  // cancellation.
+  static int GetFrameSize(int sample_rate_hz) { return sample_rate_hz / 100; }
+};
+
+class RTC_EXPORT AudioProcessingBuilder {
+ public:
+  AudioProcessingBuilder();
+  AudioProcessingBuilder(const AudioProcessingBuilder&) = delete;
+  AudioProcessingBuilder& operator=(const AudioProcessingBuilder&) = delete;
+  ~AudioProcessingBuilder();
+
+  // Sets the APM configuration.
+  AudioProcessingBuilder& SetConfig(const AudioProcessing::Config& config) {
+    config_ = config;
+    return *this;
+  }
+
+  // Sets the echo controller factory to inject when APM is created.
+  AudioProcessingBuilder& SetEchoControlFactory(
+      std::unique_ptr<EchoControlFactory> echo_control_factory) {
+    echo_control_factory_ = std::move(echo_control_factory);
+    return *this;
+  }
+
+  // Sets the capture post-processing sub-module to inject when APM is created.
+  AudioProcessingBuilder& SetCapturePostProcessing(
+      std::unique_ptr<CustomProcessing> capture_post_processing) {
+    capture_post_processing_ = std::move(capture_post_processing);
+    return *this;
+  }
+
+  // Sets the render pre-processing sub-module to inject when APM is created.
+  AudioProcessingBuilder& SetRenderPreProcessing(
+      std::unique_ptr<CustomProcessing> render_pre_processing) {
+    render_pre_processing_ = std::move(render_pre_processing);
+    return *this;
+  }
+
+  // Sets the echo detector to inject when APM is created.
+  AudioProcessingBuilder& SetEchoDetector(
+      rtc::scoped_refptr<EchoDetector> echo_detector) {
+    echo_detector_ = std::move(echo_detector);
+    return *this;
+  }
+
+  // Sets the capture analyzer sub-module to inject when APM is created.
+  AudioProcessingBuilder& SetCaptureAnalyzer(
+      std::unique_ptr<CustomAudioAnalyzer> capture_analyzer) {
+    capture_analyzer_ = std::move(capture_analyzer);
+    return *this;
+  }
+
+  // Creates an APM instance with the specified config or the default one if
+  // unspecified. Injects the specified components transferring the ownership
+  // to the newly created APM instance - i.e., except for the config, the
+  // builder is reset to its initial state.
+  rtc::scoped_refptr<AudioProcessing> Create();
+
+ private:
+  AudioProcessing::Config config_;
+  std::unique_ptr<EchoControlFactory> echo_control_factory_;
+  std::unique_ptr<CustomProcessing> capture_post_processing_;
+  std::unique_ptr<CustomProcessing> render_pre_processing_;
+  rtc::scoped_refptr<EchoDetector> echo_detector_;
+  std::unique_ptr<CustomAudioAnalyzer> capture_analyzer_;
+};
+
+class StreamConfig {
+ public:
+  // sample_rate_hz: The sampling rate of the stream.
+  // num_channels: The number of audio channels in the stream.
+  StreamConfig(int sample_rate_hz = 0, size_t num_channels = 0)
+      : sample_rate_hz_(sample_rate_hz),
+        num_channels_(num_channels),
+        num_frames_(calculate_frames(sample_rate_hz)) {}
+
+  void set_sample_rate_hz(int value) {
+    sample_rate_hz_ = value;
+    num_frames_ = calculate_frames(value);
+  }
+  void set_num_channels(size_t value) { num_channels_ = value; }
+
+  int sample_rate_hz() const { return sample_rate_hz_; }
+
+  // The number of channels in the stream.
+  size_t num_channels() const { return num_channels_; }
+
+  size_t num_frames() const { return num_frames_; }
+  size_t num_samples() const { return num_channels_ * num_frames_; }
+
+  bool operator==(const StreamConfig& other) const {
+    return sample_rate_hz_ == other.sample_rate_hz_ &&
+           num_channels_ == other.num_channels_;
+  }
+
+  bool operator!=(const StreamConfig& other) const { return !(*this == other); }
+
+ private:
+  static size_t calculate_frames(int sample_rate_hz) {
+    return static_cast<size_t>(AudioProcessing::GetFrameSize(sample_rate_hz));
+  }
+
+  int sample_rate_hz_;
+  size_t num_channels_;
+  size_t num_frames_;
+};
+
+class ProcessingConfig {
+ public:
+  enum StreamName {
+    kInputStream,
+    kOutputStream,
+    kReverseInputStream,
+    kReverseOutputStream,
+    kNumStreamNames,
+  };
+
+  const StreamConfig& input_stream() const {
+    return streams[StreamName::kInputStream];
+  }
+  const StreamConfig& output_stream() const {
+    return streams[StreamName::kOutputStream];
+  }
+  const StreamConfig& reverse_input_stream() const {
+    return streams[StreamName::kReverseInputStream];
+  }
+  const StreamConfig& reverse_output_stream() const {
+    return streams[StreamName::kReverseOutputStream];
+  }
+
+  StreamConfig& input_stream() { return streams[StreamName::kInputStream]; }
+  StreamConfig& output_stream() { return streams[StreamName::kOutputStream]; }
+  StreamConfig& reverse_input_stream() {
+    return streams[StreamName::kReverseInputStream];
+  }
+  StreamConfig& reverse_output_stream() {
+    return streams[StreamName::kReverseOutputStream];
+  }
+
+  bool operator==(const ProcessingConfig& other) const {
+    for (int i = 0; i < StreamName::kNumStreamNames; ++i) {
+      if (this->streams[i] != other.streams[i]) {
+        return false;
+      }
+    }
+    return true;
+  }
+
+  bool operator!=(const ProcessingConfig& other) const {
+    return !(*this == other);
+  }
+
+  StreamConfig streams[StreamName::kNumStreamNames];
+};
+
+// Experimental interface for a custom analysis submodule.
+class CustomAudioAnalyzer {
+ public:
+  // (Re-) Initializes the submodule.
+  virtual void Initialize(int sample_rate_hz, int num_channels) = 0;
+  // Analyzes the given capture or render signal.
+  virtual void Analyze(const AudioBuffer* audio) = 0;
+  // Returns a string representation of the module state.
+  virtual std::string ToString() const = 0;
+
+  virtual ~CustomAudioAnalyzer() {}
+};
+
+// Interface for a custom processing submodule.
+class CustomProcessing {
+ public:
+  // (Re-)Initializes the submodule.
+  virtual void Initialize(int sample_rate_hz, int num_channels) = 0;
+  // Processes the given capture or render signal.
+  virtual void Process(AudioBuffer* audio) = 0;
+  // Returns a string representation of the module state.
+  virtual std::string ToString() const = 0;
+  // Handles RuntimeSettings. TODO(webrtc:9262): make pure virtual
+  // after updating dependencies.
+  virtual void SetRuntimeSetting(AudioProcessing::RuntimeSetting setting);
+
+  virtual ~CustomProcessing() {}
+};
+
+// Interface for an echo detector submodule.
+class EchoDetector : public RefCountInterface {
+ public:
+  // (Re-)Initializes the submodule.
+  virtual void Initialize(int capture_sample_rate_hz,
+                          int num_capture_channels,
+                          int render_sample_rate_hz,
+                          int num_render_channels) = 0;
+
+  // Analysis (not changing) of the first channel of the render signal.
+  virtual void AnalyzeRenderAudio(rtc::ArrayView<const float> render_audio) = 0;
+
+  // Analysis (not changing) of the capture signal.
+  virtual void AnalyzeCaptureAudio(
+      rtc::ArrayView<const float> capture_audio) = 0;
+
+  struct Metrics {
+    absl::optional<double> echo_likelihood;
+    absl::optional<double> echo_likelihood_recent_max;
+  };
+
+  // Collect current metrics from the echo detector.
+  virtual Metrics GetMetrics() const = 0;
+};
+
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_H_

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_processing_statistics.cc

@@ -0,0 +1,22 @@
+/*
+ *  Copyright 2017 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include "modules/audio_processing/include/audio_processing_statistics.h"
+
+namespace webrtc {
+
+AudioProcessingStats::AudioProcessingStats() = default;
+
+AudioProcessingStats::AudioProcessingStats(const AudioProcessingStats& other) =
+    default;
+
+AudioProcessingStats::~AudioProcessingStats() = default;
+
+}  // namespace webrtc

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/audio_processing_statistics.h

@@ -0,0 +1,67 @@
+/*
+ *  Copyright 2017 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_STATISTICS_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_STATISTICS_H_
+
+#include <stdint.h>
+
+#include "absl/types/optional.h"
+#include "rtc_base/system/rtc_export.h"
+
+namespace webrtc {
+// This version of the stats uses Optionals, it will replace the regular
+// AudioProcessingStatistics struct.
+struct RTC_EXPORT AudioProcessingStats {
+  AudioProcessingStats();
+  AudioProcessingStats(const AudioProcessingStats& other);
+  ~AudioProcessingStats();
+
+  // Deprecated.
+  // TODO(bugs.webrtc.org/11226): Remove.
+  // True if voice is detected in the last capture frame, after processing.
+  // It is conservative in flagging audio as speech, with low likelihood of
+  // incorrectly flagging a frame as voice.
+  // Only reported if voice detection is enabled in AudioProcessing::Config.
+  absl::optional<bool> voice_detected;
+
+  // AEC Statistics.
+  // ERL = 10log_10(P_far / P_echo)
+  absl::optional<double> echo_return_loss;
+  // ERLE = 10log_10(P_echo / P_out)
+  absl::optional<double> echo_return_loss_enhancement;
+  // Fraction of time that the AEC linear filter is divergent, in a 1-second
+  // non-overlapped aggregation window.
+  absl::optional<double> divergent_filter_fraction;
+
+  // The delay metrics consists of the delay median and standard deviation. It
+  // also consists of the fraction of delay estimates that can make the echo
+  // cancellation perform poorly. The values are aggregated until the first
+  // call to `GetStatistics()` and afterwards aggregated and updated every
+  // second. Note that if there are several clients pulling metrics from
+  // `GetStatistics()` during a session the first call from any of them will
+  // change to one second aggregation window for all.
+  absl::optional<int32_t> delay_median_ms;
+  absl::optional<int32_t> delay_standard_deviation_ms;
+
+  // Residual echo detector likelihood.
+  absl::optional<double> residual_echo_likelihood;
+  // Maximum residual echo likelihood from the last time period.
+  absl::optional<double> residual_echo_likelihood_recent_max;
+
+  // The instantaneous delay estimate produced in the AEC. The unit is in
+  // milliseconds and the value is the instantaneous value at the time of the
+  // call to `GetStatistics()`.
+  absl::optional<int32_t> delay_ms;
+};
+
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_AUDIO_PROCESSING_STATISTICS_H_

TMessagesProj/jni/voip/webrtc/modules/audio_processing/include/mock_audio_processing.h

@@ -0,0 +1,180 @@
+/*
+ *  Copyright (c) 2013 The WebRTC project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef MODULES_AUDIO_PROCESSING_INCLUDE_MOCK_AUDIO_PROCESSING_H_
+#define MODULES_AUDIO_PROCESSING_INCLUDE_MOCK_AUDIO_PROCESSING_H_
+
+#include <memory>
+
+#include "absl/base/nullability.h"
+#include "absl/strings/string_view.h"
+#include "api/task_queue/task_queue_base.h"
+#include "modules/audio_processing/include/aec_dump.h"
+#include "modules/audio_processing/include/audio_processing.h"
+#include "modules/audio_processing/include/audio_processing_statistics.h"
+#include "test/gmock.h"
+
+namespace webrtc {
+
+namespace test {
+class MockCustomProcessing : public CustomProcessing {
+ public:
+  virtual ~MockCustomProcessing() {}
+  MOCK_METHOD(void,
+              Initialize,
+              (int sample_rate_hz, int num_channels),
+              (override));
+  MOCK_METHOD(void, Process, (AudioBuffer * audio), (override));
+  MOCK_METHOD(void,
+              SetRuntimeSetting,
+              (AudioProcessing::RuntimeSetting setting),
+              (override));
+  MOCK_METHOD(std::string, ToString, (), (const, override));
+};
+
+class MockCustomAudioAnalyzer : public CustomAudioAnalyzer {
+ public:
+  virtual ~MockCustomAudioAnalyzer() {}
+  MOCK_METHOD(void,
+              Initialize,
+              (int sample_rate_hz, int num_channels),
+              (override));
+  MOCK_METHOD(void, Analyze, (const AudioBuffer* audio), (override));
+  MOCK_METHOD(std::string, ToString, (), (const, override));
+};
+
+class MockEchoControl : public EchoControl {
+ public:
+  virtual ~MockEchoControl() {}
+  MOCK_METHOD(void, AnalyzeRender, (AudioBuffer * render), (override));
+  MOCK_METHOD(void, AnalyzeCapture, (AudioBuffer * capture), (override));
+  MOCK_METHOD(void,
+              ProcessCapture,
+              (AudioBuffer * capture, bool echo_path_change),
+              (override));
+  MOCK_METHOD(void,
+              ProcessCapture,
+              (AudioBuffer * capture,
+               AudioBuffer* linear_output,
+               bool echo_path_change),
+              (override));
+  MOCK_METHOD(Metrics, GetMetrics, (), (const, override));
+  MOCK_METHOD(void, SetAudioBufferDelay, (int delay_ms), (override));
+  MOCK_METHOD(bool, ActiveProcessing, (), (const, override));
+};
+
+class MockEchoDetector : public EchoDetector {
+ public:
+  virtual ~MockEchoDetector() {}
+  MOCK_METHOD(void,
+              Initialize,
+              (int capture_sample_rate_hz,
+               int num_capture_channels,
+               int render_sample_rate_hz,
+               int num_render_channels),
+              (override));
+  MOCK_METHOD(void,
+              AnalyzeRenderAudio,
+              (rtc::ArrayView<const float> render_audio),
+              (override));
+  MOCK_METHOD(void,
+              AnalyzeCaptureAudio,
+              (rtc::ArrayView<const float> capture_audio),
+              (override));
+  MOCK_METHOD(Metrics, GetMetrics, (), (const, override));
+};
+
+class MockAudioProcessing : public AudioProcessing {
+ public:
+  MockAudioProcessing() {}
+
+  virtual ~MockAudioProcessing() {}
+
+  MOCK_METHOD(int, Initialize, (), (override));
+  MOCK_METHOD(int,
+              Initialize,
+              (const ProcessingConfig& processing_config),
+              (override));
+  MOCK_METHOD(void, ApplyConfig, (const Config& config), (override));
+  MOCK_METHOD(int, proc_sample_rate_hz, (), (const, override));
+  MOCK_METHOD(int, proc_split_sample_rate_hz, (), (const, override));
+  MOCK_METHOD(size_t, num_input_channels, (), (const, override));
+  MOCK_METHOD(size_t, num_proc_channels, (), (const, override));
+  MOCK_METHOD(size_t, num_output_channels, (), (const, override));
+  MOCK_METHOD(size_t, num_reverse_channels, (), (const, override));
+  MOCK_METHOD(void, set_output_will_be_muted, (bool muted), (override));
+  MOCK_METHOD(void, SetRuntimeSetting, (RuntimeSetting setting), (override));
+  MOCK_METHOD(bool, PostRuntimeSetting, (RuntimeSetting setting), (override));
+  MOCK_METHOD(int,
+              ProcessStream,
+              (const int16_t* const src,
+               const StreamConfig& input_config,
+               const StreamConfig& output_config,
+               int16_t* const dest),
+              (override));
+  MOCK_METHOD(int,
+              ProcessStream,
+              (const float* const* src,
+               const StreamConfig& input_config,
+               const StreamConfig& output_config,
+               float* const* dest),
+              (override));
+  MOCK_METHOD(int,
+              ProcessReverseStream,
+              (const int16_t* const src,
+               const StreamConfig& input_config,
+               const StreamConfig& output_config,
+               int16_t* const dest),
+              (override));
+  MOCK_METHOD(int,
+              AnalyzeReverseStream,
+              (const float* const* data, const StreamConfig& reverse_config),
+              (override));
+  MOCK_METHOD(int,
+              ProcessReverseStream,
+              (const float* const* src,
+               const StreamConfig& input_config,
+               const StreamConfig& output_config,
+               float* const* dest),
+              (override));
+  MOCK_METHOD(bool,
+              GetLinearAecOutput,
+              ((rtc::ArrayView<std::array<float, 160>> linear_output)),
+              (const, override));
+  MOCK_METHOD(int, set_stream_delay_ms, (int delay), (override));
+  MOCK_METHOD(int, stream_delay_ms, (), (const, override));
+  MOCK_METHOD(void, set_stream_key_pressed, (bool key_pressed), (override));
+  MOCK_METHOD(void, set_stream_analog_level, (int), (override));
+  MOCK_METHOD(int, recommended_stream_analog_level, (), (const, override));
+  MOCK_METHOD(bool,
+              CreateAndAttachAecDump,
+              (absl::string_view file_name,
+               int64_t max_log_size_bytes,
+               absl::Nonnull<TaskQueueBase*> worker_queue),
+              (override));
+  MOCK_METHOD(bool,
+              CreateAndAttachAecDump,
+              (FILE * handle,
+               int64_t max_log_size_bytes,
+               absl::Nonnull<TaskQueueBase*> worker_queue),
+              (override));
+  MOCK_METHOD(void, AttachAecDump, (std::unique_ptr<AecDump>), (override));
+  MOCK_METHOD(void, DetachAecDump, (), (override));
+
+  MOCK_METHOD(AudioProcessingStats, GetStatistics, (), (override));
+  MOCK_METHOD(AudioProcessingStats, GetStatistics, (bool), (override));
+
+  MOCK_METHOD(AudioProcessing::Config, GetConfig, (), (const, override));
+};
+
+}  // namespace test
+}  // namespace webrtc
+
+#endif  // MODULES_AUDIO_PROCESSING_INCLUDE_MOCK_AUDIO_PROCESSING_H_